From 2010 to 2015, PhD
From 2007 to 2009, MS
From 2003 to 2007, BS
From 2015 to 2016, Research assistant, Sharif Energy Research Institute (SERI), Presenting the combined heat and power (CHP) roadmap for Iran
Sharif University of Technology, Tehran
From Jul, 2006 to Sep, 2006, Trainee and designer of the heating and cooling systems for Seymareh power plant
Farab Company, Installation section
From Jul, 2005 to Sep, 2005, R&D researcher to investigate the effect of calibration on quality of the manufactured parts and vibration of press 3 building
Iran Khodro Company, Press section
From Sep, 2017 to now, Lecturer
From 2010 to 2015, Stress gradient plasticity analysis to study size effects considering dislocation sources
Studying the mechanisms responsible for size effects in thin films including the effects of dislocation nucleation, the dislocation pileup as well as stress gradients. Investigating an analytical solution of a dislocation pileup with a finite-strength source in the presence of various stress gradients. Presenting a continuum implementation of stress gradient plasticity to analyze size dependent plasticity in passivated thin films under tension. Presenting a second order stress gradient plasticity model to address the competition between the first and the second stress gradients in size effect interpretation of thin curved and straight film under pure bending. Predicting the effect of variable length scale combined with the stress gradient effects on the torsion response of polycrystalline metal micro wires.
From 2007 to 2010, Analysis and optimization of thin walled composite beam with curvilinear fiber
Investigating the performance improvements of the variable-stiffness beams with curvilinear fiber over conventional, constant-stiffness beams with incorporation of non-classical effects. Optimization of variable-stiffness composite beams subjected to different loading for maximum failure load. Optimization of composite wings modeled as thin-walled beams through the use of curvilinear fiber for maximum aeroelastic instability speed purpose using a linear spanwise variation of the fiber. Finite Element Analysis of Laminate with curvilinear fiber under compressive loading with and without opening.
From 2006 to 2007, Tolerance analysis of a powder clutch with DLM and Monte Carlo simulation
Tolerance analysis of a powder clutch manufactured in Moje Poya Compan using Matlab software.
Size effect in small scale
'Effect of source strength on dislocation pileups in the presence of stress gradients', Phil. Mag., Taylor and Francis, 95 (2015) 2175-2197, Authors: Z. Zamani, S. Soleymani Shishvan, A. Assempour.
'Stress gradient interpretation of boundary layers in passivated thin films', International journal of non-linear mechanics, Elsevier, 81 (2016) 139-146, Authors: Z. Zamani, S. Soleymani Shishvan, A. Assempour.
'Second order stress gradient plasticity with an application to thin film bending', International journal of mechanics and materials in design, Springer, (2016) 1-14, Authors: A. Assempour, S. Soleymani Shishvan, Z. Zamani.
'Curvilinear fiber optimization tool for aeroelastic design of composite wings', Journal of Fluids and Structures, Elsevier, 33 (2012) 180–190, Authors: H. Haddadpour, Z. Zamani.
'Curvilinear fiber optimization tool for design thin walled beams', Thin-Walled Structures, Elsevier, 49 (2011) 448–454, Authors: Z. Zamani, H. Haddadpour, M. R. Ghazavi.
Z. Zamani, A. Assempour, S. Soleymani Shishvan, 'Stress gradient plasticity in predicting size dependence behavior' presented in 21st Annual International Conference on Mechanical Engineering-ISME2013, 7-9 May, 2013, Tehran, Iran.
Z. Zamani, GH. Rahimi, M. R. Ghazavi, 'Analysis of Laminate with curvilinear fiber under compressive loading', presented in 17st Annual International Conference on Mechanical Engineering-ISME2009, 7-9 May, 2009, Tehran, Iran.
Honors and Awards
Ranked 1 based on GPA among M.Sc students in Mechanical Engineering, Dept. of Mechanical Engineering, Tarbiat Modarres University, Oct, 2009.