From 08/2005 to 01/2011, Doctorate
Tsinghua University, China
From 10/2013 to Present, Researcher
National Institute of Advanced Industrial Science and Technology, Japan
From 07/2011 to 09/2013, JSPS Postdoc
National Institute for Materials Science, Japan
From 01/2011 to 07/2011, Research Associate
Tsinghua University, China
From 04/2014 to 03/2019, Multi-scale and high-accuracy deformation measurement
This project will develop a novel moire technique to measure deformation accurately at multi-scales.
From 07/2011 to 09/2013, Micro/nano deformation measurement of composites
Micro/nano-scale deformation distributions of composites were measured by moiré methods and the digital image correlation method.
Book Chapter: "Buckling behaviors and interfacial toughness of a micron-scale composite structure with a metal wire and a flexible substrate", Materials and Failures in MEMS & NEMS, 2014, WILEY, Authors: Q.H. Wang, H.M. Xie, Y.J. Li. (In press)
Book Chapter: "Fabrication technique of deformation carriers (gratings and speckle patterns) with FIB for micro/nano-scale deformation measurement", Lecture Notes in Nanoscale Science and Technology, Vol. 20, Chapter 10. Wang Zhiming M. (Ed.). FIB Nanostructures, 2013, XIII, 530 p. 375 illus., 200 illus, Springer International Publishing, ISBN: 978-3-319-02873-6, Authors: Y.J. Li, H.M. Xie, Q.H. Wang, and Z.W. Liu.
Q.H. Wang, S. Kishimoto, X.F. Jiang, and Y. Yamauchi. Spot moiré fringes: Determination of domain boundaries and structural parameters in ordered nanoporous structures. Chemistry-A European Journal, 20, 8: 2179-2183 (2014). DOI: 10.1002/chem.201303319
Q.H. Wang, S. Kishimoto, and H. Tsuda. Formation of three-way scanning electron microscope moiré on micro/nano structures. The Scientific World Journal, 2014: 281954 (2014). DOI: 10.1155/2014/281954
Q.H. Wang, S. Kishimoto, H.M. Xie, Y.J. Li, and D. Wu. Buckling behavior of micro metal wire on polymer membrane under the combined effect of electrical loading and mechanical loading. Transactions of Nonferrous Metals Society of China, 24, 8: 2606-2611 (2014). DOI: 10.1016/S1003-6326(14)63389-6
S. Kishimoto*, Q.H. Wang*, Y. Tanaka, and Y. Kagawa. Compressive mechanical properties of closed-cell aluminum foam-polymer composites. Composites Part B: Engineering, 64: 43-49 (2014). DOI: 10.1016/j.compositesb.2014.04.009
X.L. Dai, H.M. Xie and Q.H. Wang. Geometric phase analysis based on the windowed Fourier transform for the deformation field measurement. Optics & Laser Technology, 58: 119-127 (2014). DOI: 10.1016/j.optlastec.2013.11.010
Q.H. Wang, S. Kishimoto, X.F. Jiang, and Y. Yamauchi. Formation of secondary moiré patterns for characterization of nanoporous alumina structures in multiple domains with different orientations. Nanoscale, 5: 2285-2289 (2013). DOI: 10.1039/c3nr34042b
Q.H. Wang, S. Kishimoto, Y. Tanaka, and Y. Kagawa. Micro/submicro grating fabrication on metals for deformation measurement based on ultraviolet nanoimprint lithography. Optics and Lasers in Engineering, 51, 7: 944-948 (2013). DOI: 10.1016/j.optlaseng.2013.02.021
Q.H. Wang, S. Kishimoto, H.M. Xie, Z.W. Liu, and X.H. Lou. In-situ high temperature creep deformation of micro structure with metal film wire on flexible membrane using geometric phase analysis. Microelectronics Reliability, 53, 4: 652-657 (2013). DOI: 10.1016/j.microrel.2012.10.016
Q.H. Wang, S. Kishimoto, and Y. Yamauchi. Structural analysis of a micro hexagonal mesh using a three-way grating by hexagonal digital moiré method. Journal of the Japan Society for Experimental Mechanics, 13: s143-s147 (2013). DOI: 10.11395/jjsem.13.s143
S. Kishimoto, and Q.H. Wang. Dynamic deformation observation and measurement of porous materials by moiré method using high-speed digital camera. Journal of the Japan Society for Experimental Mechanics, 13: s172-s177 (2013). DOI: 10.11395/jjsem.13.s172
J.G. Zhu, Y.J. Li, Q.H. Wang, and H.M. Xie. Fabrication and application of microscale deformation carrier based on FIB. Journal of Experimental Mechanics, 28, 2 (2013). (in Chinese) DOI: 10.7520/1001-4888-12-119
Q.H. Wang, S. Kishimoto, and Y. Yamauchi. Three-directional structural characterization of hexagonal packed nanoparticles by hexagonal digital moiré method. Optics Letters, 37, 4: 548-550 (2012). DOI: 10.1364/OL.37.000548
Q.H. Wang, and S. Kishimoto. Simultaneous analysis of residual stress and stress intensity factor in a resist after UV-nanoimprint lithography based on electron moiré fringes. Journal of Micromechanics and Microengineering, 22, 10: 105021 (2012). DOI: 10.1088/0960-1317/22/10/105021
Q.H. Wang, S. Kishimoto, H.M. Xie, K.W. Xu, and J.F. Wang. Characterization of the arrangement feature of copper interconnects by moiré inversion method. Theoritical & Applied Mechanics Letters, 2: 021008 (2012). DOI: 10.1063/2.1202108
Q.H. Wang, Y.J. Yin, H.M. Xie, J. Liu, P.W. Chen, and Q.M. Zhang. Buckling modes of polymer membrane restricted by metal wires. Soft Matter, 7: 2888-2894 (2011). DOI: 10.1039/C0SM01126F
Q.H. Wang, H.M. Xie, J. Lu, P.W. Chen, and Q.M. Zhang. Measurement of interfacial toughness of metal film wire and polymer membrane through electricity induced buckling method. Journal of Colloid and Interface Science, 358, 2: 491-496 (2011). DOI: 10.1016/j.jcis.2011.03.042
Q.H. Wang, H.M. Xie, Z.X. Hu, J. Zhang, J. Sun, and G. Liu. Residual thermo-creep deformation of copper interconnects by phase-shifting SEM moiré method. Applied Mechanics and Materials. 83: 185-190 (2011). DOI: 10.4028/www.scientific.net/AMM.83.185
Q.H. Wang, S. Ri, H. Tsuda, S. Kishimoto, Y. Tanaka, and Y. Kagawa. Fabrication of multi-scale grid patterns as deformation carriers in optical methods. Proceedings of The 2014 SEM Fall Conference. Oct. 19-22, 2014 Beijing, CHINA.
Q.H. Wang, H. Tsuda, S. Kishimoto, Y. Tanaka, and Y. Kagawa. Three moiré techniques under a laser scanning microscope for micron/submicron-scale deformation measurement. Proceedings of The 11th International Measurement Confederation (IMEKO) Symposium on Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI). Sep. 2-5, 2014 Tsukuba JAPAN.
Q.H. Wang, H. Tsuda, S. Kishimoto, Y. Tanaka, Y. Kagawa. Generation of secondary moiré fringes under a laser scanning microscope for deformation measurement without the effect of scanning distortion. Proceedings of The 2014 JSEM Annual Conference on Experimental Mechanics. Aug. 28-30, 2014 Hyougoken, JAPAN.
S. Kishimoto, Q.H. Wang, Y. Kagawa. High speed moiré method for dynamic deformation observation by CMOS high speed camera. Proceedings of The International Conference on Experimental Mechanics 2013 (ICEM 2013) and the 12th Asian Conference on Experimental Mechanics (ACEM12). Nov. 25-27, 2013 Bangkok, THAILAND.
Q.H. Wang, S. Kishimoto, Y. Tanaka, K. Naito, and Y. Kagawa. Generation of overlap-scanning laser microscope moiré fringes using micro grids for in-situ deformation measurement. Proceedings of The 2013 Annual Conference of The Japan Society of Mechanical Engineers. Sep. 8-11, 2013 Okayama, JAPAN. (in English)
Q.H. Wang, S. Kishimoto, K. Naito, Y. Tanaaka, and Y. Kagawa. Fabrication of nanoscale speckle pattern on polymer using broad ion beam milling. Proceedings of The 62th Annual Conference of The Society of Materials Science, Japan. May 17-19, 2013 Tokyo, JAPAN. (in English)
(5) D. Wu, H.M. Xie, and Q.H. Wang. An investigation on the interfacial toughness of the metal thin film/polymer substrate. Proceedings of The ISEM-ACEM-SEM-7th ISEM'12-Taipei Conference. Nov. 8-11, 2012 Taipei, Taiwan.
(6) Q.H. Wang, S. Kishimoto, H.M. Xie, Z.W. Liu, and X.H. Lou. Electro-thermal deformation measurement of micro film line on polymer membrane by geometric phase analysis. Proceedings of The 23rd International Congress of Theoretical and Applied Mechanics (ICTAM2012). Aug. 19 -24, 2012 Beijing, CHINA. (Session chair)
(4) S. Kishimoto, Q.H. Wang, and Y. Kagawa. Deformation of metallic cellular structural material reinforced by polymer. Proceedings of The 20th Symposium on Mechanical Materials and Material Processing Technology of the Japan Society of Mechanical Engineers. Nov. 30-Dec. 2, 2012 Osaka, JAPAN. (in Japanese)
(5) Y.J. Li, H.M. Xie, M.Q. Xu, and Q.H. Wang. The application of SEM moiré method in residual deformation measurement of metal film wire. Proceedings of The 18th Annual Conference of Beijing Society of Theoritical and Applied Mechanics. Jan. 9, 2012 Beijing, CHINA. (in Chinese)
Honors and Awards
First Prize for Comprehensive Excellence, Tsinghua Alumni-Duqinghua Scholarship, Tsinghua University, 2008
First Prize for Comprehensive Excellence, Tsinghua Fellow-Zhanghuan Scholarship, Tsinghua University, 2007
Outstanding Contribution Award for NASPC/TUWMAE2008, 2008
Q.H. Wang, H.M. Xie, S. Kishimoto, H. Tsuda, and Y. Yamauchi. Recent development of moiré techniques for micro/nano-scale structure characterization. The International Conference on Photonics and Optical Engineering. Oct. 13-15, 2014 Xi’an, CHINA.
S. Kishimoto, Q.H. Wang, and Y. Kagawa. Fabrication of substrate with Micro-pattern by pulse electric current sintering method. The 7th World Congress on Particle Technology (WCPT7). May 19-22, 2014 Beijing, CHINA.
Q.H. Wang, S. Kishimoto, H. Tsuda, X. F. Jiang, and Y. Yamauchi. Characterization technique for periodic micro/nano structures with multiple domains based on secondary moiré fringes. The International Conference on Small Science (ICSS 2013). Dec. 15-18, 2013 Las Vegas, USA.
S. Kishimoto, Q.H. Wang, and Y. Kagawa. Deformation of cell wall of metallic cellular materials with polymer during compressive test. Proceedings of The 3rd Asian Symposium on Materials and Processing (ASMP2012). Aug. 30-31, 2012 Chennai, INDIA.
Q.H. Wang, H.M. Xie, S. Kishimoto, and F.L. Dai. Characterization of the surface periodic structure of butterfly wing by means of moiré inversion method. 2008 National Academic Seminar on Biomechanical Measuring Technologies and Applications. DEC 22-24, 2008 Shanghai, CHINA.