Personal Information
Seyed Saeid Rahimian Koloor

Department of Applied Mechanics and Design, Faculty of Mechanical Engineering, University of Technology, Skudai, Johor, Malaysia

Seyed Saeid Rahimian Koloor
Educations
From 2009 to 2015, PhD (Applied Mechanics), Universiti Teknologi Malaysia (UTM) , Malaysia
From 2007 to 2009, M.Sc. Applied Mechanics, Universiti Teknologi Malaysia (UTM) , Malaysia
Work Experiences
From 2010 to Present, Full Time Researcher, Project Adviser, Research Assistant , Universiti Teknologi Malaysia (UTM)
From 2015 to Present, Project Manager - Design/Analysis of Aerospace Structures , Universiti Teknologi Malaysia (UTM)
Projects
From June 2008 to 2015, Simulation Methodology for Fracture Processes of Composite Laminates using Damage Based-Models , Fulltime Researcher (Applied Mechanics), CSMLab, FME, UTM
From 2015 to Present, Fatigue Mechanics of Laminated Composite Materials , Fulltime Researcher (Applied Mechanics), CSMLab, FME, UTM
Speciality
Fatigue and Fracture Mechanics, Damage Mechanics, Biomechanics
Advanced Materials, Composite Materials
Finite Element Method, XFEM
Book
BOOK CHAPTER: S.S.R.Koloor, A. Abdul-Latif, X.J. Gong and M.N. Tamin, “Evolution Characteristics of Damage in CFRP Composites under Transverse Loading”, Damage and Fracture of Composite Materials and Structures, Advanced Structured Materials 17, Chapter 5, pp. 45-59, Springer-Verlag Berlin Heidelberg 2012.
Journal Articles
SH. Sharifi Teshnizi, S.S.R.Koloor, G. Sharifishourabi, Amran Bin Ayob and Mohd Yazid Yahya , ”Effect of Ply Thickness on Displacements and Stresses in Laminated GFRP Cylinder Subjected to Radial Load”, Advanced Materials Research Journal, Vols. Key Engineering Materials II,488-489, pp367-371, 2012.
S.S.R. Koloor, Redzuan Abdullah, “Damage Mechanics Model for Fracture Process of Steel-Concrete Composite Slabs”, Applied Mechanics and Materials Vol. 165 (2012) pp 339-345, 2012.
M. Khalajmasoumi, S. S. R. Koloor, A. Arefnia, I. S. Ibrahim, J. Mohd Yatim, “Hyperelastic Analysis of High Density Polyethylene under Monotonic Compressive Load”, Applied Mechanics and Materials, Vols. 229-231, pp 309-313, 2012.
S.S.R. Koloor, Behzad Abdi, M. R. Abdullah, Amran Ayob, Mohd Yazid bin Yahya, “Effect of Strain Rate Upsetting Process on Mechanical Behaviour of Epoxy Polymer”, Applied Mechanics and Materials Vols. 229-23, pp 303-308, 2012.
Zohreh Arabshahi, Mohammed Rafiq Abdul Kadir, Seyed Saeid Rahimian Koloor, Jamal Kashani, “Finite element analysis of temporomandibular joint implant under five simulated clenching loads”, Advanced Science Letters, American Scientific Publisher, 19, 3293-3296, 2013. (IF: 1.253).
M. Khalajmasoumi, S. S. R. Koloor, A. Arefnia, I. S. Ibrahim, J. Mohd Yatim, “Explicit Dynamic Simulation of High Density Polyethylene Beam under Flexural Loading Condition”, Applied Mechanics and Materials, Vols. 229-231, pp 2150-2154, 2012.
Behzad Abdi, S.S.R. Koloor, M. R. Abdullah, Amran Ayob, Mohd Yazid bin Yahya, “Effect of Strain-Rate on Flexural Behavior of Composite Sandwich Panel”, Applied Mechanics and Materials Vols. 229-231, pp 766-770, 2012.
M. Khalajmasoumi, S. S. R. Koloor, A. Arefnia, I. S. Ibrahim, J. Mohd Yatim, “Finite Element Analysis of Curvature Precast Polymer Panel for Temporary Support of Tunnels”, Applied Mechanics and Materials, 2012, Vols. 229-231, pp 771-777, 2012.
S.S.R.Koloor, A. Abdul-Latif and M.N. Tamin, “Mechanics of Composite Delamination under Flexural Loading”, Key Engineering Materials Journal, Vols. Fracture and Strength of Solids VII, 462-463, pp 726-73,1, 2011.
S.S.R.Koloor, J.Kashani, Mohammed Rafiq Abdul Kadir, “Simulation of Brittle Damage for Fracture Process of endodontically treated tooth”, International Federation for Medical and Biological Engineering (IFMBE) Proceedings, Volume 35, Part 8, pp.210-214, Springer, 2011.
S.S.R.Koloor, H. Hussin and M.N. Tamin, “Mode-I Fracture Characterization of CFRP Laminated Composites”, Advanced Materials Research Journal, Vols. Key Engineering Materials II,488-489, pp 552-556, 2012.
SH. Sharifi Teshnizi, S.S.R.Koloor, G. Sharifishourabi, Amran Bin Ayob and Mohd Yazid Yahya, “Mechanical Behavior of GFRP Laminated Composite Pipe Subjected to Uniform Radial Patch Load”, Advanced Materials Research Journal, Vols .Key Engineering Materials II,488-489, pp 542-546, 2012.
M. Khalajmasoumi, I. S. Ibrahim, J.Mohd Yatim and S.S.R.Koloor, “Nonlinear Mechanical Analysis of Polymer Precast Panel for temporary Support of Tunnels”, Advanced Materials Research Journal, Vols. Key Engineering Materials II,488-489, pp 547-551, 2012
S.S.R. Koloor and M.N. Tamin, “Effects of lamina damages on flexural stiffness of CFRP composites", Composites: Enabling Tomorrow's Industry Today, ISBN: 978-1-62993-066-4, Vol.1, pp. 237-243, 2012.
Zohreh Arabshahi, Jamal Kashani, S.S.R.Koloor, Mohammed Rafiq Abdul Kadir and Abbas Azari, “Design Analysis of TMJ Implant under Physiological Loading Condition”, Advanced Materials Research Journal, Vols. Key Engineering Materials II,488-489, pp 996-1000, 2012
Theng Pin Ng, S.S.R. Koloor*, JRP. Djuansjah and M.R. Abdul Kadir, "Linear Elastic Analysis of Bovine Cortical Bone under Compression Loading", Advanced Materials Research Journal, Vol. 845, pp. 324-329, 2014.
S.S.R. Koloor, M.R. Ayatollahi, M.N. Tamin, Modelling Interlaminar Shear Crack-Jump Phenomenon in Fiber-Reinforced Polymer Composites, Advance Material Research, Materials, Industrial, and Manufacturing Engineering Research Advances 2, Vol. 1125, pp 74-78, 2015.
M.A. Abdullah, M.R. Arjmandi, S.S.R. Koloor, K.J. Wong, M.N. Tamin, Interlaminar Damage Behavior of CFRP Composite Laminates under Cyclic Shear Loading Conditions, Advance Material Research, April 2015, Materials, Industrial, and Manufacturing Engineering Research Advances 2, Vol. 1125, pp 121-125, 2015.
Conference Papers
Keynote Presentation, S.S.R. Koloor and M.N. Tamin*, “Simulation of Materials Damage and Fracture in CFRP Composites for Structural Applications”, Society for the Advancement of Materials and Process Engineering, SAMPE Asia, Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia, 21-23 February,2012
Keynote Presentation, S.S.R. Koloor, M.N. Tamin*, “Assessment of Damage Events in CFRP Composite Beams under Flexural Loading”, 7th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2013, Madrid, Spain, 1-4 of July, 2013.
Keynote Presentation, S.S.R. Koloor, M. N. Tamin*, "Assessment of Progressive Failure Processes in Fiber-Reinforced Polymer Composite Laminates", The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, February 18-19, 2014.
Keynote Presentation, S.S.R. Koloor*, M. N. Tamin, "Mechanics of Damage and Fracture in Micro/Meso Scale, Case Study; Damage Mechanics in CFRP Composite Laminates", 1st International Seminar of nanotechnology, Faculty of nanotechnology, Urmia University, Urmia, Iran, February 28, 2014.
Seyed S.R. Koloor and, Mohd N. Tamin, “Damage Mechanics of Composite Laminates under Flexural Loading”, the 3rd SEA Abaqus Users’ Conference (AUC2009, Penang, Malaysia), 22-23 October 2009, (Wins as third best paper).
S.S.R. Koloor, A. Abdul-Latif and M.N. Tamin, “Mechanics of Composite Delamination under Flexural Loading”, the 8th International Conference on Fracture & Strength of Solids 2010 (FEOFS 2010), 7-9 June 2010.
M. Joshani, S.S.R. Koloor, Redzuan Abdullah, “Damage Mechanics Model for Fracture Process of Steel-Concrete Composite Slabs”, the 8th International Conference on Fracture & Strength of Solids 2010 (FEOFS 2010), 7-9 June 2010.
S.S.R. Koloor, A. Abdul-Latif and M.N. Tamin, “Evolution Characteristics of Damage in CFRP Composites under Transverse Loading”, 4th Intentional Conference on Advanced Computational Engineering and Experimenting (ACE-X2010), 8-9 July, 2010 Paris, France.
S.S.R. Koloor, J.Kashani, Mohammed Rafiq Abdul Kadir, “Simulation of Brittle Damage for Fracture Process of endodontically treated tooth”, the 5th Kuala Lumpur International Conference on Biomedical Engineering in Conjunction with the AsianPacific Conference on Medical and Biological Engineering (APCMBE 2011), 20-23 June 2011, Kuala Lumpur, Malaysia.
Seyed Saeid Rahimian Koloor, Norizah Redzuan, Mohd Nasir Tamin, “Shear-dominated Interlaminar Fracture Process in CFRP Composite Laminates”, 9th International Conference on Fracture & Strength of Solids (FEOFS), June 9-13 , Jeju, Korea, 2013.
Theng Pin Ng, S.S.R.Koloor*, JRP. Djuansjah, M.R. Abdul Kadir, “Damage Evolution of Bovine Cortical Bone under Compression Monotonic Loading”, 9th International Conference on Fracture & Strength of Solids (FEOFS), June 9-13 , Jeju, Korea, 2013.
S.S.R. Koloor, M. R. Ayatollahi, M. N. Tamin, Matrix-dominated damage Process in CFRP Composite Laminates under Flexural Loading Condition", The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), February 18-19, Tehran, Iran, 2014.
Keynote Presentation, M. N. Tamin*, S.S.R. Koloor, A. Abdul-Latif, M.A. Khattak, "Damage-based Reliability Assessment of FRP Composite Laminates for Aero-structure Application”, The 13th International Bhurban Conference on Applied Sciences & Technology, 12-16 January, Islamabad, Pakistan, 2016.
S.S.R. Koloor, M. N. Tamin, "Modeling of Materials Damage in FRP Composites Laminates based on the Manufacturing Processes”, South East Asia SIMULIA Regional User’s Conference 2015, 15th-16th October, Singapore, 2015
S.S.R. Koloor, M. R. Ayatollahi, M. N. Tamin, “Assessment of Multiple Failure in CFRP Composite Laminates Using Damage-based Models", The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2016), February 16-17, Tehran, Iran, 2016.
S.S.R. Koloor, M. N. Tamin, "Failure Assessment of Fiber Reinforced Polymer Composites based on Various Fabrication Processes”, The 15th International Conference of Iranian Aerospace Society , Civil Aviation Technology Collage, 23-25February, Tehran, Iran 2016.
Honors and Awards
Visiting UTM Doctoral Candidate at Fatigue and Fracture Research Laboratory, Iran University of Science and Technology (IUST), Tehran, Iran, 2014.
UTM International Doctoral Fellowship (IDF), 2012.
2011 UTM International Doctoral Fellowship (IDF), 2011.
Teaching Assistance (TA) Scheme Award, Faculty of Mechanical Engineering, UTM, 2011.
Invited Talks
S.S.R. Koloor and M.N. Tamin*, “Simulation of Materials Damage and Fracture in CFRP Composites for Structural Applications”, Society for the Advancement of Materials and Process Engineering, SAMPE Asia, Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia, 21-23 February,2012.
S.S.R. Koloor, M.N. Tamin*, “Assessment of Damage Events in CFRP Composite Beams under Flexural Loading”, 7th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2013, Madrid, Spain, 1-4 of July, 2013.
S.S.R. Koloor, M. N. Tamin*, "Assessment of Progressive Failure Processes in Fiber-Reinforced Polymer Composite Laminates", The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran, Iran, February 18-19, 2014.
S.S.R. Koloor*, M. N. Tamin, "Mechanics of Damage and Fracture in Micro/Meso Scale, Case Study; Damage Mechanics in CFRP Composite Laminates", 1st International Seminar of nanotechnology, Faculty of nanotechnology, Urmia University, Urmia, Iran, February 28, 2014.
M. N. Tamin*, S.S.R. Koloor, A. Abdul-Latif, M.A. Khattak, "Damage-based Reliability Assessment of FRP Composite Laminates for Aero-structure Application”, The 13th International Bhurban Conference on Applied Sciences & Technology, 12-16 January, Islamabad, Pakistan, 2016.
ADDRESS
Science Publishing Group
548 FASHION AVENUE
NEW YORK, NY 10018
U.S.A.
Tel: (001)347-688-8931