Peer Reviewers
Abdelrhman Menazea
Department of Spectroscopy, Physics Division, National Research Centre
Dokki, Giza, Egypt
Abid Ali
Department of Mechanical Engineering, Ramachandra College of Engineering
Eluru, Andhra Pradesh, India
Ahmad Al-Jabareen
Department of Materials Engineering, Al-Quds University
Bethlehem, Palestinian Territories
Ahmed El-Hadi
Department of Physics, Faculty of Applied Science, Umm Al-Qura University
Makkah, Saudi Arabia
Professor Aisha Moustafa
Solid State Physics Department, Physics Division, National Research Centre
Cairo, Cairo-Egypt, Egypt
Alejandro Tur Gil
Department of Materials Technology, Robert Bosch
Zaragoza, Spain
Ali Salimian
School of Engineering, Londn South Bank Unversity
London, UK
Alok Kumar Tripathi
Department of Physics and Astrophysics, University of Delhi
Delhi, India
Amalraj Peter Amalathas
Department of Electrotechnology, Czech Technical University
Prague, Czech Republic
Amir Muhammad
Department of Textile Engineering, NED University of Engineering and Technology
Karachi, Sindh, Pakistan
Amna Safdar
Department of Materials, School of Chemical & Materials Engineering, National University of Sciences and Technology
Islamabad, Punjab, Pakistan
Anatoly Shepelev
National Science Center “Kharkiv Institute of Physics and Technology”
Kharkiv, Ukraine
Andreea Hegyi
National Institute for Research and Development in Construction, Urban Planning and Sustainable Spatial Development,URBAN-INCERC
Bucharest, Romania
Antoniu Turcu
Department of Electroenergetics and Management, Technical University of Cluj-Napoca
Cluj-Napoca, Cluj, Romania
Apurv Saxena
Department of Chemistry, Missouri University of Science and Technology
Rolla, Missouri, USA
Arvind Sharma
Deaprtment of Basic and Applied Science, National Institute of Technology
Yupia, Arunachal Pradesh, India
Asmaa El-deeb
Department of Building Physics Institute, Housing And Building National Research Center
Giza, Cairo, Egypt
Asmalina Mohamed Saat
Malaysian Institute of Marine Engineering Technology, Universiti Kuala Lumpur
Lumut, Perak, Malaysia
Aurawan Rittidech
Department of Physics, Faculty of Science, Mahasarakham University
Mahasarakham, Thailand
Azeem Pasha
Department of Mechanical Engineering, Brindavan College of Engineering, Visveswaraihya Technological University
Bangalore, Karnataka, India
Babak Ravaji
Depatment of Mechanical Engineering, Texas A&M University
College Station, Texas, USA
Balakrishnan S
Department of Mechanical Engineering, Anna University
Coimbatore, Tamilnadu, India
Bale baidi Blaise
Department of Physics, University of Maroua
Maroua, Cameroon
Basma Ben Difallah
Laboratory of Electromechanical Systems, National Engineering School of Sfax, University of Sfax
Sfax, Tunisia
Beny Bandanadjaja
Foundry Engineering Department, Politeknik Manufaktur Bandung
Bandung, Jawa Barat, Indonesia
Department of Mechanical Engineering, Brindavan College of Engineering
Bengaluru, Karnataka, India
Bhupendra Karki
Department of Physics, University of Louisville
Louisville, Kentucky, USA
Biju C.S
Department of Physics, Malankara Catholic College
Mariagiri, Kaliyakkavilai, Tamil Nadu, India
Bokai Liao
Department of Chemistry and Chemical Engineering, Guangzhou University
Guangzhou, Guangdong, China
Brahim Chermime
Departement Mechanical, University Khenchela
Khenchela, Algeria
Bulat Galimzyanov
Institute of Physics, Kazan Federal University
Kazan, Republic of Tatarstan, Russia
Bushra Rashid
Mechanical Technologies Department, Institute of Technology, Middle Technical University
Alzafaranya, Baghdad, Iraq
C Andal
Department of Physics, Dr MGR Educational and Research Institute
Chennai, Tamil Nadu, India
Carloa Acosta
College of Engineering, University of Texas at San Antonio
San Antonio, Texas, USA
Carolina Hernández
Department of Mechanical Engineering, National Institute of Technology of Mexico, Technological Institute of Celaya
Celaya, Guanajuato, Mexico
Chaowat Autthanit
Center of Excellence on Catalysis and Catalytic Reaction Engineering, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University
Bangkok, Thailand
Christian Gauss
School of Engineering, Univeristy of Waikato
Hamilton, Waikato, New Zealand
Christian Kästner
Department of Production Technology, Technische Universität Ilmenau
Ilmenau, Thuringia, Germany
Christos Argyrakis
Materials Engineering Department, Rolls-Royce plc
Derby, Derbyshire, UK
Cristina Gaspar
Cenimat|i3N, Faculty of Sciences and Technology, New University of Lisbon
Caparica, Setúbal, Portugal
Dalia Saber
Department of Materials Engineering, Zagazig University
Zagazig, Egypt
Damien Leduc
Waves and Complex Media Laboratory, University Le Havre Normandy
Le Havre, Normandy, France
Dennis Ndaya
Department of Chemistry, University of Connecticut
Storrs, Connecticut, USA
Dmitry Kharitonov
Jerzy Haber Institute of Catalysis and Surface Chemistry Polish Academy of Sciences
Krakow, Poland
Dmytro Marchenko
Department of Tractors and Agricultural Machines Operation and Technical Service, Faculty of Engineering and Energy, Mykolayiv National Agrarian University
Mykolayiv, Ukraine
Doinita Neiner
Los Alamos National Laboratory
Los Alamos, New Mexico, USA
Dongping Zhan
School of Metallurgy, Northeastern University
Shenyang, Liaoning, China
Douglas Santos
Faculty President Antônio Carlos Porto (FAPAC PORTO)
Palmas, Tocantins, Brazil
Dr Vijayalakshmi
Department of Chemistry, RMK Engineering College
Chennai, Tamilnadu, India
Dr Mohamed Nasr
Department of Synthetic Fiber, National Research Center
6 October, Giza, Egypt
Eman Elesh
Department of physics, Port Said University
Port Said, Married, Egypt
Eman Abd El-Monaem
Department of Chemistry, Alexandria University
Alexandria, Egypt
Esmaeil Tohidlou
Department of Materials Engineering, Sistan and Baluchestan University
Zahedan, Sistan and Baluchestan, Iran
Fabrizio Bernini
Department of Chemical and Geological Sciences, University of Modena and Reggio Emilai
Modena, Italy
Faissal Aziz
National Center for Research and Studies on Water and Energy, University Cadi Ayyad
Marrakech, Morocco
Fang Yuan
Department of Chemistry, Princeton University
Princeton, New Jersey, USA
Fatemehsadat Sayyedan
Department of Materials Engineering, Isfahan University of Technology
Isfahan, Iran
Fatma Mouez
Department of Metal Technology, Central Metallurgical of Research and Development Institute
Cairo, Egypt
Federico Veronesi
National Research Council, Institute of Science and Technology for Ceramics
Italy
Gabriela Lujan Brollo
Department of Manufcaturing and Materials Engineering, Faculty of Mechanical Engineering, University of Campinas
Campinas, São Paulo, Brazil
Geetha Munusamy
Department of Physics, Narasu's Sarathy Institute of Technology
Salem, Tamilmadu, India
Gnanamoorthy Govindhan
Department of Inorganic Chemistry, University of Madras
Chennai, Tamilnadu, India
Gobalakrishnan B
Department of Manufacturing Engineering, Annamalai University
Annamalai Nagar, Tamilnadu, India
Gohi Bi Foua Claude Alain
School of Biological and Chemical Engineering, Panzhihua University
Panzhihua, China
Gopinath Shit
Corrosion Science and Technology Division, Indira Gandhi Center for Atomic Research
Chennai, Tamil Nadu, India
Haider Jasim
Chemical Engineering Department, College of Engingeering, Basrah University
Basrah, Iraq
Hala Saeed
Department of Chemical Engineering and Pilot Plant, National Research Centre
Cairo, Giza, Egypt
HamidReza Vanaei
Department of Dynamic Fluid and Materials, Arts et Metiers Institute of Technology
Paris, Il de france, France
Hassan Al-Karawi
Department of Architecture and Civil Engineering, Chalmers University of Technology
Gothenburg, Västra Götaland, Sweden
Helen Ayoubi
Department of Operative Dentistry and Endodontics, Faculty of Dentistry, Damascus University
Damascus, Syria
Hulya Bicer
Department of Metallurgy and Materials Engineering, Kutahya Dumlupınar University
Kütahya, Turkey
Hussaini Syed Shaukatullah Azmatullah
Crystal Growth Laboratory, Department of Physics, Milliya arts Science and Management Science College
Beed, Maharashtra, India
Ionelia Voiculescu
Department of Materials Technology and Welding, University Politehnica of Bucharest
Bucharest, Muntenia, Romania
Iraj Moradi Gharatloo
Nuclear Science and Technology Research Institute
Isfahan, Iran
Isaac Asempah
Department of Mechanical Engineering, Accra Technical University
Accra, Greater accra region, Ghana
Jaskiran Kaur
Department of Physics, Guru Nanak Dev University
Amritsar, Punjab, India
Jianghe Liu
Department of Materials Science and Engineering, Harbin Institute of Technology
Shenzhen, Guangdong, China
Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University
Nanjing, Jiangsu, China
Joaquin Yus
Institute for Ceramics and Glass, Consejo Superior de Investigaciones Científicas
Madrid, Spain
Jugal Sahoo
Chemical and Biomolecular Engineeering, University of Notre Dame
Mishawaka, Indiana, USA
Juntao Li
GRIMED Medical(Beijing)Co. Ltd.
Beijing, China
Jure Žigon
Department of Wood Science and Technology, Faculty of Biotechnical, University of Ljubljana
Ljubljana, Slovenia
Kalyani Sreekumar
Department of Physics, Noorul Islam University
Thuckalay, Tamilnadu, India
Kaouther Assili
Departement of Chemistry, Faculty of Science, Tunis university Tunis El-Manar
Tunis, Tunisia
Karuppasamy Pichan
SSN Research Centre, Sri Sivasubramaniya Nadar College of Engineering
Chennai, Tamilnadu, India
Kataria Bharat
Department of Nanoscience and Advanced Materials, Saurashtra University
Rajkot, Gujarat, India
Khadija Munawar
Department of Mechanical Engineering, Faculty of Engineering, University of Malaya
Kuala Lumpur, Malaysia
Lais Alves
Department of Civil Engineering, Federal Center of Technological Education Celso Suckow da Fonseca
Rio De Janeiro, Brazil
Leighton Jones
Department of Chemistry, Northwestern University
Evanston, Illinois, USA
Leila Sorkhi
Departmnt of Mettalurgy and Materials Scienc, South Dakota School of Mines and Technology
Rapid City, South Dakota, USA
Instituto de Investigaciones en Ciencia y Tecnología de Materiales, Consejo Nacional de Investigaciones Científicas y Técnicas
Mar del Plata, Buenos Aires, Argentina
Li Kong
College of Aerospace and Civil Engineering, Harbin Engineering University
Harbin, Heilongjiang, China
Ling Wang
Oak Ridge National Laboratory
Oak Ridge, TN, USA
Liwei Wang
School of Materials Science and Engineering, Hebei University of Science and Technology
Shijiazhuang, Hebei, China
Mahdi Amne Elahi
Center of Excellence for High Strength Alloys Technology, School of Metallurgy and Materials Engineering, Iran University of Science and Technology
Tehran, Iran
Project Management Institute (PMI)
Toronto, Ontario, Canada
Mahsa Sedighi
Division of Nanomedicine, Faculty of Medicine, Birjand University of Medical Sciences
Birjand, Southern Khorasan, Iran
Marcel Ferreira
Department of Chemical and Biological Sciences, Biosciences Institute of Botucatu
Botucatu, Brazil
María García-martínez
Metallic Materials Area, National Institute of Aerospace Technology (INTA)
Torrejón de ardoz, Madrid, Spain
Mariana Pop
Department of Materials Science, Technical University of Cluj-Napoca
Cluj-Napoca, Romania
Marius Bodea
Department of Materials Science Engineering, Technical University of Cluj
Cluj-Napoca, Cluj, Romania
Maryam Shojaie-bahaabad
department of chemistry and materials engineering, shahrood university of technology.shahrood,iran
shahrood, semnan, Iran
Marzieh Mardali
Department of Materials Engineering, Isfahan University of Technology
Qazvin, Iran
Mehran Bahramyan
Department of Materials Engineering, Sahand University of Technology
Shiraz, Fars, Iran
Mert Gül
Department of Materials Science, Eskisehir Technical University
Eskisehir, Turkey
Michael Elwardany
Asphalt and Petroleum Technologies, Western Research Institute
Laramie, Wyoming, USA
Mohamed Ebrahim
Department of Solid State Physics, National Research Centre
Giza, Dokki, Egypt
Department of Conservation& Restoration, Fayoum University
Fayoum, Egypt
Mohamed Saad
Department of Physics, College of Science, Qassim University
Buraidah, Qassim, Saudi Arabia
Mohammad Mahbubul Alam
Department of Textile Engineering, Ahsanullah University of Science and Technology
Dhaka, Bangladesh
Mohammed Elamin
Department of Mechanical and Aerospace Engineering, North Carolina State University
Raleigh, North Carolina, USA
Mohanad Mohammed
Department of Engineering and Infrmation Science, School of Physics, University of Wollongong
Wollongong, New South Wales, Australia
Mohd Izrul Ramli
1Center of Excellence Geopolymer and Green Technology (CeGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis
Perlis, Malaysia
Mohsan Jelani
School of Science, Nanjing University of Science and Technology
Nanjing, Jiangsu, China
Mona Mohsen
Department of Physics, Ain Shams University
Cairo, Abbassia, Egypt
Mostafiz Chowdhury
United States Army Research Laboratory
Adelphi, Maryland, USA
Muhsin Kudhier
Department of Physics, Education College, Mustansiriyah University
Baghdad, Iraq
Murugapandiyan P
Anil Neerukonda Institute of Technology and Sciences
Visakhapatnam, Andhrapradesh, India
Mustapha Aouaichia
Department of Engineering Physics, Oran University of Science and Technology - Mohamed Boudiaf
Oran, Algeria
Nadiah Ameram
Faculty of Bioengineering and Technology, University Malaysia Kelantan
Jeli, Kelantan, Malaysia
Narpinder SIngh Chahil
Department of Physics, University of Alabama and Department of Physical Science, University of Holy Cross
Gretna, Louisiana, USA
Natalita Maulani Nursam
Research Center for Electronics and Telecommunication, Indonesian Institute of Sciences
Bandung, West Java, Indonesia
Naveen Reddy
Department of Sciences and Humanities, Vignan Foundation for Science, Research and Technology
Vadlamudi, Andhra Pradesh, India
Negin Farshchi
Faculty of Mechanical Science and Engineering, Technische Universität Dresden
Dresden, Sachsen, Germany
Neha Sharma
Department of Physics, Sant Gahira Guru University, Sarguja
Ambikapur, Chhattisgarh, India
Neil Martinez
Department of Materials Science, Simón Bolivar University
Carcas, Distrito Capital, Venezuela
Nelly Staneva
Department Furniture Production, University of Forestry
Sofia, Bulgaria
Nida Alam
Department of Applied Chemistry, Aligarh Muslim University
Aligarh, Uttar Pradesh, India
Nidhal Jandow
Department of Physics, College of Education, Mustansiriyah University
Baghdad, Iraq
Nikhil Dole
Lam Research Corp
Fremont, California, USA
Noto Susanto Gultom
Department of Materials Science and Engineering, National Taiwan University of Science and Technology
Taipei, Taiwan
Oksana Zakharkevich
Department of Clothing Technology and Design, Khmelnytskyi National University
Khmelnytskyi, Khmelnytskyi Region, Ukraine
Oluwaseun Alo
Department of Mechanical Engineering, Vaal University of Technology
Vanderbijlpark, Gauteng, South Africa
Panagiota Sarafoglou
Chemical Engineer, National Techonogical University of Athens
Athens, Attica, Greece
Parisa Ghobadi
Department of Mining and Metallurgy, Amirkabir University
Tehran, Iran
Parisa Eftekharimilani
Materials Science and Engineering, Delft University of Technology
Delft, South Holland, Netherlands
Patthranit Wongpromrat
Chemical Engineering Department, Faculty of Engineering, King Mongkut's Institute of Technology Ladkrabang
Ladkrabang, Bangkok, Thailand
Pedro henrique cerento de Lyra
Department of Civil Engineering, Instituto Maua de Tecnologia
São paulo, Brazil
Pradip Patra
Quality, R&D of JSW Steel Limited
Mumbai, Maharashtra, India
Prasad Raut
Imerys
San Jose, California, USA
Prashanth K P
Department of Mechanical Engineering, Visvesvaraya Technological University
Bangalore, Karnataka, India
Priyatham Tumurugoti
Materials Science and Engineering, Alfred University
Alfred, New York, India
Rabia Khosa
Department of Physics, University of Education, Dera Ghazi Khan Campus
Dera Ghazi Khan, Punjab, Pakistan
Radhiyah Aljarrah
Department of Physics, Kufa University
Najaf, Iraq
Raheela Naz
School of Materials Science and Engineering, Shanghai Jiao Tong University
Multan, Punjab, Pakistan
Rahmat Satoto
Indonesian Institute of Sciences (LIPI)
Bandung, West Java, Indonesia
Rajesh A S
Department of Mechanical Engineering, Faculty of Mechanical Engineering, JSS Science and Technology University
Mysore, Karnataka, India
Ramalingam S
Department of Chemistry, School of Advanced Sciences, Kalasalingam Academy of Research and Education
Virudhunagar, Tamil Nadu, India
Rapela Maphanga
Modelling and Digital Science, Council for Scientific and Industrial Research
Pretoria, Gauteng, South Africa
Ravi Kumar
Department of Mechanical Engineering, Sathyabama University
Chennai, Tamilnadu, India
Reda El Shater
Department of Physics, Tanta university
Tanta, Gharbiya, Egypt
Regina Gomes
Department of Forest Science, University of São Paulo
Piracicaba, São Paulo, Brazil
Ren Dechun
Institute of Metal Research, Chinese Academy of Sciences
ShenYang, LiaoNing, China
Rifa El-Khozondar
Department of Physics, Al-Aqsa University
Gaza, Gaza Strip, Palestinian Territories
Rodianah Alias
Department of Manufacturing Technology, University Sultan Zainal Abidin
Kuala Nerus, Terengganu, Malaysia
Rosiane Maria da Costa Farias
Academic Unit of Materials Engineering, Federal University of Campina Grande
Campina Grande, Brazil
Ruipeng Gao
School of Mechanical and Precision Instrument Engineering,xi'an University of Technology
Xi'an, Shaanxi Province, China
Ruochen Han
Micron Technology
Boise, Idaho, USA
Professor Saad Salman
Glass Research Departement, National Research Centre,
Cairo, Egypt
Sadananda Chakraborty
Department of Marine Engineerig, Indian Maritime University
Kolkata, West Bengal, India
Saïd Kardellass
Laboratory of Thermodynamics and Energetics, Ibn Zohr University
Agadir, Morocco
Saideep Muskeri
Department of Materials Science and Engineering, University of North Texas
Denton, Texas, USA
Sameer Nadaf
Department of Basic science, Nanasaheb Mahadik College of Engineering, Shivaji University
Islampur, Maharashtra, India
Sandan Kumar Sharma
Department of Mechanical Engineering, University of Ljubljana
Ljubljana, Slovenia
Sanjivani Shastri
Department of Physics, Cummins College of Engineering for Women
Nagpur, Maharashtra, India
Department of Chemistry, Koneru Lakshmaiah Education Foundation
Guntur, Andhrapradesh, India
Peer Reviewers Acknowledgment

Peer reviewers are key to advancing scholarship and contributing to the quality of scholarly journals. We would like to thank the following reviewers who have taken part in the peer-review process for International Journal of Materials Science and Applications.

Join as a Reviewer
Sara Mahlab
Department of Physics, Faculty of Science, Suez Canal University
Ismailia, Egypt
Saraswathy Gnanasundaram
Shoe and Product Design Centre, CSIR- Central Leather Research Institute
Chennai, Tamilnadu, India
Sezgin Cengiz
Material Science and Engineering, Gebze Tekchical University
Kocaeli, Select State, Turkey
Shaghayegh Shabani
Department of Materials Science and Engineering, Iran University of Science and Technology
Tehran, Iran
Sharmila Saminathan
Department of Physics, Karpagam Academy of Higher Education
Coimbatore, Tamil Nadu, India
Shenbaga Velu P
Department of Mechanical Engineering, Mepco Schlenk Engineering College
Sivakasi, Tamilnadu, India
Shinhyu Kang
School of Civil and Environmental Engineering, Oklahoma State University
Stillwater, Oklahoma, USA
Shivananda C S
Department of Physics, KLE University
Bangalore, Karnataka, India
Sneha Gaddam
GlobalFoundries
Ballston Lake, New York, USA
Soha Mohajeri
Department of Materials Science, Sharif University of Technology
Tehran, Iran
Department of Mechanical Engineering, Dublin City University
Finglas, Dublin, Ireland
Somia yassin hussain Abdalkarim
Department of Mechanical Engineering,Zhejiang Sci-Tech University
Hangzhou, Zhejiang, China
Soraya Mohamed
Department of Physics, Faculty of Science, Aswan University
Aswan, Egypt
Stefania Scialla
Institute of Nanotechnology (NANOTEC) - CNR
Lecce, Italy
Sudesh Singh
Department of Mechanical Engineering, Indian Institute of Technology
Varanasi, Uttar Pradesh, India
Suna Cetin
Department of Fine Art, Çukurova University
Adana, Turkey
Sura Ahmed
Department of Materials Engineering, University of Technology
Baghdad, Iraq
Tairui Zhang
School of Mechanical Engineering, Shandong University
Jinan, Shandong, China
Tashiema Ulrich
Department of Materials Science and Technology, Los Alamos National Laboratory
Los Alamos, New Mexico, USA
Tasnia Hossain
Department of Electrical and Electronic Engineerig, University of Asia Pacific
Dhaka, Bangladesh
Professor Tjipto Sujitno
National Nuclear Energy Agency Indonesia
Yogyakarta, Daerah Istimewa Yogyakarta, Indonesia
Umakant Maurya
Division of Soil Resource Studies, ICAR- National Bureau of Soil Survey and Land Use Planning
Nagpur, Maharashtra, India
Umer Masood Chaudry
Advanced Materials Science and Engineering Department, Sungkyunkwan University
Suwon, Gyonggi do, South Korea
Urvashi Verma
School of Technology and Sciences, A. P. Goyal Shimla University
Shimla, Himachal Pradesh, India
Velmurugan Chandrasekaran
Department of Production Engineering, National Institute of Technology, Tiruchirappalli
Tiruchirappalli, Tamil Nadu, India
Victória Vieira Kopp
Department of Chemical Engineering, University Federal of Rio Grande do Sul
Porto Alegre, Rio Grande do Sul, Brazil
Vien Le
Department of Inorganic Chemistry, Faculty of Chemical Engineering, Ho chi Minh city University of Technology
HochiMinh, Vietnam
Vilson Dalla Libera Junior
Department of Civil Engineering, Anapolis University Center
Anápolis, Brazil
Vishvanath Ghanwat
Department of Chemistry, Yashavantrao Chavan Institute of Science Satara
Satara, Maharashtra, India
Wael Mohamed
National Authority for Remote Sensing and Space Sciences
Cairo, Egypt
Wael Mohamed
Polymers Department, National Research Centre
Giza, Egypt
Wang Zhimei
Chongqing Expressway Group Co. LTD
Chongqing, China
Weslley Assis
Departament of Ecxat Sciences, Universidade Federal Fluminense
Volta Redonda, Rio de Janeiro, Brazil
Xiahe Liu
School of Metallurgy, Northeastern University
Shenyang, Liaoning, China
Xiaohong Wang
College of Materials Science and Engineering, Southwest Petroleum University
Chengdu, Sichuan, China
Xinfeng Li
School of Mechanical and Materials Engineering, Washington State University
Pullman, USA
Xinzhou Wang
College of Materials Science and Engineering, Nanjing Forestry University
Nanjing, Jiangsu, China
Xuan Chen
Department of Materials Science and Engineering, University of Central Florida
Orlando, Florida, USA
Ye Zhu
Chinese National Key Laboratory for Remanufacturing
Beijing, China
Yibo Wu
College of Materials Science and Engineering, Beijing Institute of Petrochemical Technology
Beijing, China
Yiwei Weng
Singapore Centre for 3D Printing, Mechanical and Aerospace Engineering, Nanyang Technological University
Singapore
Professor Youjun Lu
Department of Material Science and Engineering, North Minzu University
Yinchuan, Ningxia, China
Yuan Zhang
Department of Mechanical Engineering, University of Houston
Houston, Texas, USA
Yuan Chao Hu
Institute of Physics, Chinese Academy of Sciences
Beijing, China
Yunxiong Zeng
Department of Chemistry and Chemical, Hunan University
Changsha, Hunan, China
Zahrah Almutawah
Department of Physics and Astronomy, University of Toledo
Toledo, Ohio, USA
Zeng Liu
School of Science, Beijing University of Posts and Telecommunications
Beijing, China
Zenghui Liu
Department of Electronic Science and Technology, Xi'an Jiaotong University
Xi'an, Shaanxi, China
Zhanqiu Tan
School of Materials Science and Engineering, Shanghai Jiao Tong University
Shanghai, China
Zhenhai Fu
Key Laboratory of Salt Lake Resources Chemistry of Qinghai Province, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences
Xining, Qinghai, China
Zhi Yu
School of Resources and Safety Engineering, Central South University
Changsha, Hunan, China
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186