Final Drying of Thin Fleece Layer to Prevent Humidity Condensation
International Journal of Energy and Environmental Science
Volume 3, Issue 1, January 2018, Pages: 1-18
Received: Jul. 24, 2017; Accepted: Aug. 1, 2017; Published: Jan. 15, 2018
Views 1314      Downloads 42
Authors
Karel Adámek, Department of Flow Numerical Simulations, VUTS - Center for Development in Machinery Research, Liberec, Czech Republic
Jan Kolář, Department of Flow Numerical Simulations, VUTS - Center for Development in Machinery Research, Liberec, Czech Republic
Pavel Peukert, Department of Flow Numerical Simulations, VUTS - Center for Development in Machinery Research, Liberec, Czech Republic
Article Tools
Follow on us
Abstract
The paper presents methods of final drying of thin fleece layer after outlet from drying chamber, to prevent the water vapor condensation from material packed in impermeable foil. There are presented results of numerical simulations of possible solutions. Suitable design is not expensive and meets all operational requirements. The supplementary both operational and investment costs are very low.
Keywords
Fleece, Numerical Flow Simulation, Drying
To cite this article
Karel Adámek, Jan Kolář, Pavel Peukert, Final Drying of Thin Fleece Layer to Prevent Humidity Condensation, International Journal of Energy and Environmental Science. Vol. 3, No. 1, 2018, pp. 1-18. doi: 10.11648/j.ijees.20180301.11
Copyright
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
References
[1]
Kolář, J., Adámek, K.: Flow numerical simulations around rotating drum (Numerické simulace proudění okolo rotujícího povrchu (research report VÚTS Liberec No. VAM 08/2011, 123 p., unpublished
[2]
Kolář, J., Adámek, K.: Aerodynamics of air-carried fleece (Aerodynamika nesené netkané textilie), research report VÚTS Liberec No. VAM 01/2011, 58 p., unpublished
[3]
Chyský, J.: Wet air (Vlhký vzduch), SNTL Praha, 1963
[4]
Maštovský, O.: Fluid mechanics, (Hydromechanika), SNTL Praha, 1963
[5]
Software Fluent, actual version
[6]
Adámek, K.: Permeability of textile layers, (Prodyšnost textilních vrstev), in: Proc. of the XVI. Int. conf. AENMFM, 6 p., University of Žilina, 2008 (in Czech)
[7]
Šubert, R.: Evaluation of textiles permeability at higher flow velocities (Hodnocení prodyšnosti textilií při vyšších rychlostech proudění), dissertation FT TU in Liberec, 2006 (in Czech)
[8]
Halasová, A.: Contribution to the evaluation of permeability of clothing sandwiches under condition of quick air flow (Příspěvek k hodnocení prodyšnosti oděvních sendvičů v podmínkách rychle proudícího vzduchu), dissertation FT TU in Liberec, 2007 (in Czech)
[9]
Adámek, K.: Permeability of winding on the bobbin core. Proc. of the ME2015, p. 52-57, Vienna, 2015
[10]
Adámek, K.: Problems of industrial air exhausting, in: Proc. of the ECFD VI, p. 7454-7465, Barcelona, Spain, 2014
[11]
Mayer, J., Matějka, J: Thermal machines and equipments (Tepelné stroje a zařízení), VŠST Liberec, 1971 (in Czech)
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186