Exploration of Pipeline Filling Methods for High-pressure Water Descaling System
International Journal of Mineral Processing and Extractive Metallurgy
Volume 4, Issue 1, March 2019, Pages: 7-13
Received: Dec. 23, 2018;
Accepted: Mar. 5, 2019;
Published: Mar. 28, 2019
Views 941 Downloads 84
Yang Dezheng, Chongqing Pump Industry Co., Ltd.-National Enterprise Technology Center, Chongqing, China
Ao Feng, Chongqing Pump Industry Co., Ltd.-National Enterprise Technology Center, Chongqing, China
Yang Yiguang, Chongqing Pump Industry Co., Ltd.-National Enterprise Technology Center, Chongqing, China
Follow on us
High-pressure water descaling is an important equipment in hot rolling of steel plant. Filling post pipelines of descaling valve during the interval of descaling operation can effectively protect the system equipment. Pipeline filling can prevent water loss from becoming empty pipe and forming air collection, thus to eliminate pipeline impact and vibration caused by descaling operation, and to avoid damage of pipeline equipment. There are two methods of water filling: low-pressure filling and high-pressure filling. Non-energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, and the descaling system of direct water supply of descaling pump, should choose high-pressure filling, which consumes little energy of good reliability and safety; while the energy-saving descaling system, i.e. the system of mixed water supply of descaling pump and accumulator, should choose low-pressure filling, which has lower energy consumption and remarkable energy-saving effect, but with relatively poor system safety.
Descaling System, Accumulator, Pipeline Filling, Descaling Valve, Water Filling Valve
To cite this article
Exploration of Pipeline Filling Methods for High-pressure Water Descaling System, International Journal of Mineral Processing and Extractive Metallurgy.
Vol. 4, No. 1,
2019, pp. 7-13.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Cui Jianli, Application of Segmental Descaling In Hot Continuous Rolling, China Metallurgy 2012(6):45.
Xie Changrui, Development of High Pressure & Low Flow Descaling System for Steckel Mill of Nangang, Steel Rolling, 2011(6):56.
You Fei, Effect of Accumulator Parameters on Water Hammer in High-pressure Water Descaling System, Journal of Water Resources & Water Engineering, 2013 (10): 157.
Zhu Haijun, Optimum Selection of High-pressure Water Descaling Nozzle for Stainless Steel Billet, Steel Rolling, 2015(3):51.
Yang Bo, Frequent Failure Analysis & Countermeasures of High-pressure Water Descaling System, China Metallurgy, 2013 (11):49.
Jin Chenghu, Application Analysis of High-pressure Water Descaling System in A 1780mm Hot Rolling, Fluid Drive And Control, 2014(7):42.
Guo Weidong, Optimization of Descaling Device for Wide & Heavy Plate of Hansteel, Steel Rolling, 2014(2):38.
Li Jingyang, Application of High Voltage Inverter in Descaling System of Baosteel Hot Rolling, China Metallurgy, 2012(7):38.
Li Yufeng, Energy-Saving Renovation of High-Pressure Water Descaling Pump System in Hot Strip Mill, China Metallurgy, 2015(3):41.
Han Qinggang, Numerical Calculation of High-pressure Water Descaling System for Hot Rolling Strip, Steel Rolling 2010(4):40.