Magneto Hydrodynamics Free Convection in a Rectangular Enclosure with Three Square Heated Block
International Journal of Theoretical and Applied Mathematics
Volume 5, Issue 6, December 2019, Pages: 74-82
Received: Oct. 14, 2019;
Accepted: Nov. 9, 2019;
Published: Nov. 21, 2019
Views 580 Downloads 153
Md. Raihanul Haque, Department of Mathematics, Dhaka University of Engineering & Technology, Gazipur, Bangladesh
Md. Abdul Alim, Department of Mathematics, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Md. Mahmud Alam, Department of Mathematics, Dhaka University of Engineering & Technology, Gazipur, Bangladesh
Md. Shahidul Alam, Department of Mathematics, Dhaka University of Engineering & Technology, Gazipur, Bangladesh
In the present study the effect of natural convection in a rectangular cavity with three square shape heated block is focused in this numerical is studied. The horizontal bottom wall and three square blocks are temperature Th while the left and right vertical walls and horizontal top wall are temperature Tc with Th>Tc. The governing equations along with appropriate boundary conditions for the present problem are first transformed into a non-dimensional form and the resulting non linear system of partial differential equations are then solved numerically using Galerkin’s finite element method. Parametric studies of the fluid flow and heat transfer in the enclosure are performed for magnetic parameter Hartmann number Ha, Prandtl number Pr and Rayleigh number Ra. The streamlines, isotherms and average Nusselt number at the hot wall and average temperature of the fluid in the enclosure are presented for the parameters. The numerical results indicate that the Hartmann number and Rayleigh number have strong influence on the streamlines and isotherms. On the other hand Prandtl has little effect on the stream line and isotherm plots. Finally, the mentioned parameters have significant effect on average Nusselt number at the hot wall and average temperature of the fluid in the cavity.
Md. Raihanul Haque,
Md. Abdul Alim,
Md. Mahmud Alam,
Md. Shahidul Alam,
Magneto Hydrodynamics Free Convection in a Rectangular Enclosure with Three Square Heated Block, International Journal of Theoretical and Applied Mathematics.
Vol. 5, No. 6,
2019, pp. 74-82.
M. K. Molallemi and K. S. Jang, “Prandtl number effects on laminar mixed convection heat transferin alid driven cavity”, int. J. Heat and mass Tran. 35 pp, 1881-1892, 1992.
Md. Shahidul Alam, M. A. Alim and Md. S. H. Mollah, “Mixed magneto convection in a lid driven square enclosure with a sinusoidal vertical wall and Joule heaing”, procedia engineering 194 (2017) 463-470.
A Malleswaran and S. Sivasankaran “A numerical simulation on MHD mixed convection in a lid drivencavity with corner heaters”, Journal of applied fluid mechanic, Vol 09, no 1, pp 311-319, 2016.
Ahmed F Khudheyer“MHD mixed convection in double lid driven differentially heated trapezoidal cavity “, int. Journal of application or innovation in engineering and management, Vol4, issue 2, February 2015.
M. M. Rahman, M. A. Alim and M. M. A. Sarker“Numerical study on the conjugate effect of Joule heating and magneto hydrodynamics mixed convection in an obstructed lid driven square cavity In heat and mass transfer, 37 (2010), 524-534.
M. K. Moallemi and k. S. Jang, “Prandtl number effects on laminar mixed convection heat transfer in a lid driven cavity”, Int. J. Heat mass Transfer, Vol 35, No 8, pp 1881-1892, 1992.
F. Hakan Oztop and Ihsan Dagtekin, “Mixed convection in two-sided lid –driven differentially heated square cavity”, Int. J. of Heat and mass transfer, vol. 47, pp 1761-1769, 2004.
S. Mahmud, and R. A. Fraser, “Magneto hydrodynamic free convection and entropy generation in a square porous cavity”, Int. J. of Heat and mass Transfer (47), 3245-3256, 2004.
S. Saha, G. saha and N. Hasan, “Mixed convection in a lid driven cavity with internal heat source”, Procedings of the 13th Annual paper meet 25 sep. 2011.
S. Jani, M. Mahmoodi, and M. Amini, "Magneto hydrodynamic Free Convection in a Square Cavity Heated from Below and Cooled from Other Walls", International Journal of Mechanical and Mechatronics Engineering, Vol. 7, No. 4, 2013.
M. S. Alam, M. S. H. Mollah, and M. A. Alim, "Finite Element Analysis of Natural Convection in a Rectangular Cavity and Partially Heated Wall", Engineering and Applied Sciences, Vol. 2, No. 3, pp. 53-58, 2017.
M. S. Alam, M. S. Alam, M. A. Alim, and M. S. H. Mollah, "Numerical Simulation of Natural Convection in a Rectangular Cavity with Triangles of Different Orientation in Presence of Magnetic Field", AIP Conference Proceedings 1851, 020037 doi: 10.1063/1.4984666, 2017.
M. S. Alam, M. S. H. Mollah, A. H. Bhuiyan and M. A. Alim, "Numerical Simulation of Natural Convection in a Rectangular Cavity with Corner Heater in Presence of Magnetic Field", Journal of Computer and Mathematical Sciences, Vol. 8, No. 6, pp 215-225, June 2017.
M. S. Alam, M. S. Alam, M. S. H. Mollah, and M. A. Alim, “Effect of Prandtl Number on Magneto-Convection in a Lid Driven Square Cavity with a Sinusoidal Vertical Wall", Journal of Multidisciplinary Engineering Science Studies, Vol. 3 Issue 8, August-2017Journal of Multidisciplinary Engineering Science Studies, Vol. 3 Issue 8, 2017.
M. S. Alam, M. S. Alam, M. A. Alim, and M. S. H. Mollah "Mixed Magneto Convection in a Lid Driven Square Enclosure with a Sinusoidal Vertical Wall and Joule Heating", Available online at www.sciencedirect.com1877-7058 © 2017 doi 10.1016/j.proeng.2017.08.172, 2017.
A. B. Halim, M. A. Alim and M. U. Nasir “Effect of Hartmann Number on Free Convective Flow in a Square Cavity with Different Positions of Heated Square Block”, World Academy of Science, Engineering and Technology International Journal of Mathematical, Computational, Physical, Electrical and Computer Engineering Vol. 8, No: 2, 2014.
J. Abraham and J. Varghese, “Mixed convection in a differentially heated square cavity with moving lids”, Int. J. of engineering Research & Technol. (IJERT) ISSN-2278-0181, no, 1-4, issue 12, 2015.
P. M. kishore, V. Rajesh, S. V. K. Verma, “Effects of heat transfer and viscous dissipation on MHD free convection flow past an exponentially accelerated vertical plate with variable temperature”, Journal of naval Architecture and Marine Engineering Vol. 7, No. 2, pp 101-110, 2010.
A. K. M. Sadrul Islam, M. Z. Hossain, M. A. H. Mamun, andS. Shaha “Mixed convection in an enclosure with different inlet and exit configuration”, Journal of Applied Fluid Mechanics, vol 1, no 1, pp 78-93, 2008.
A. Raji and M. Hasnaoui, “Mixed convection heat transfer in a rectangular cavity ventilated and heated from the side”, An international journal of computation and methodology 33: 5,533-548 (1998).
N. G. Carona, M. Corcione and E. Habib, “Natural convection in shallow and tall cavity with the four walls differentially heated”, 6th international conference on heat transfer, Fluid mechanics and thermodynamics 30 June 2008.
M. Ghalambaz, M. Sabour and I. Pop, “Free convection in a square cavity filled by a porous medium saturated by a nanofluid: Viscous and radiation effects”, Engineering science and technology, an international journal-2016.
E. C. Mehmetand Eliif Buyuk, “Natural convection flow under a magnetic field in an inclined rectangular enclosure heated and cooled on adjacent walls”, Fluid dynamics research 38 (2006), 564-590.
B. Paritosh and D. songita, “A numerical study of laminar natural convection heat transfer inside a closed cavity with different aspect ratio”, U. P. B Sci-Bull series-1, Vol 77, Issue 2, 2015.
A. Gowriskankar, S. Vignesh, P. B. ShyamSunder, R. Abhinav, M. Vivek and V. RatnaKishon, “Numerical study of natural convection in an enclosure with an internal heat source at higher Rayleigh number” Heat transfer Asian Research, 44 (7), 2015.
S. Roy and tonmoyBasak, “Finite element analysis of natural convection flows in a square cavity with non-uniformly heated wall(s)”, Int. J. of engineering Science, 43, (2005), 668-680.
Khalil M. Khanafer, Ali J. Chamka, “Mixed convection flow in a lid driven enclose filled with a fluid-saturated porous media”, Int. J. Heat and mass Transfer, 42, (1999)2481.
C. Taylorand V. Hood, “A numerical solution of the Navier–Stokes equations using finite element techniqueComput. Fluids, 1, pp. 73–89 (1973).