A Simplified Mathematical Model for Calculating the Thermal Efficiency of a Wood Pellets-Fired Industrial Boiler on the Basis of Error Analysis Method
Science Journal of Energy Engineering
Volume 6, Issue 2, June 2018, Pages: 37-41
Received: Oct. 17, 2018; Published: Oct. 18, 2018
Views 480      Downloads 26
Authors
Xiaozhou Liu, School of Material & Energy, Guangdong University of Technology, Guangzhou, PR China; School of Engineering and Technology, University of Hertfordshire, Hatfield, United Kingdom
Ruiyu Li, Guangdong Special Equipment Inspection and Research Institute Shunde Inspection Institute, Foshan, PR China
Chunhui He, Guangdong Special Equipment Inspection and Research Institute Shunde Inspection Institute, Foshan, PR China
Yuesheng Li, Guangdong Special Equipment Inspection and Research Institute Shunde Inspection Institute, Foshan, PR China
Hongwei Wu, School of Engineering and Technology, University of Hertfordshire, Hatfield, United Kingdom
Article Tools
Follow on us
Abstract
The traditional calculation method of industrial boiler thermal efficiency needs to input many parameters, which leads to a lot of complicated calculations. It is not suitable to make an accurate judgement on the operating condition of an industrial boiler, especially a wood pellets-fired one. In order to solve this problem, the paper presents a simplified mathematical model to calculate the thermal efficiency of a wood pellets-fired industrial boiler on-line by using an error analysis method. More concretely speaking, first, based on the results of the error analysis of an industrial boiler thermal efficiency, main factors that affect the thermal efficiency of a wood pellets-fired industrial boiler are obtained. Then, a simplified mathematical model to calculate the thermal efficiency of the wood pellets-fired industrial boiler is developed in terms of the major factors. Finally, the calculating results of the industrial boiler thermal efficiency based on the model are compared with the test values given by Guangdong Special Equipment Inspection and Research Institute and the maximum deviation limits within 3%. Therefore, it can be concluded that the simplified mathematical model proposed in this paper for calculating the thermal efficiency of the wood pellets-fired industrial boiler is proved to be practical, applicable and worth popularizing.
Keywords
Thermal Efficiency, Wood Pellets-Fired Industrial Boiler, Simplified Mathematical Model, Error Analysis, Model Verification
To cite this article
Xiaozhou Liu, Ruiyu Li, Chunhui He, Yuesheng Li, Hongwei Wu, A Simplified Mathematical Model for Calculating the Thermal Efficiency of a Wood Pellets-Fired Industrial Boiler on the Basis of Error Analysis Method, Science Journal of Energy Engineering. Vol. 6, No. 2, 2018, pp. 37-41. doi: 10.11648/j.sjee.20180602.12
References
[1]
"Biomass Energy". Alternate Energy. Retrieved 16 February 2015.
[2]
"Sources of biomass". BIOMASS Energy Centre. Retrieved 16 February2015.
[3]
"Use EFB Pellet as Renewable Energy". Biofuel Resource. Retrieved16 February 2015.
[4]
Wood Pellets from PKS & Coconut Shell. "Wood Pellets from PKS and Coconut Shell". Retrieved 13 January 2013.
[5]
Alakangas, Eija (18 November 2009). "European pellet standards". Retrieved 16 February 2015.
[6]
Cardellichio, P.; et al. (2010). "Massachusetts Biomass Sustainability and Carbon Policy Study: Report to the Commonwealth of Massachusetts Department of Energy Resources"(PDF). Natural Capital Initiative Report NCI-2010-03. Brunswick, Maine: Manomet Center for Conservation Sciences. Retrieved 2014-03-14.
[7]
Wang Baowei, Qu Yuhua. Discussion on the boiler measures for saving coals from boiler [J]. Boiler Manufacturing, 1999(1):65-70.
[8]
Liang Xin, Wang Naiji. The joint control status of pulverized coal industry boiler and pollutants [J]. District Heating, 2014(6):52-58
[9]
Ministry of Machine Building and Electronic Industry of PRC, GB10184--1988 performance test code of utility boiler[S], In Chinese, 1988
[10]
Japanese standards association, JIS B 8222—1993 Land boiler-heat balancing, 1993
[11]
Saidur R, Ahamed J U, Masjuki H H. Energy, exergy and economic analysis of industrial boilers [J]. Energy Policy, 2010, 38(5):2188-2197.
[12]
Luo Chao et al, The Effect Analysis of Thermal Efficiency and Optimal Design for Boiler System, The 8th International Conference on Applied Energy – ICAE2016.
[13]
J. Bujak, Mathematical modelling of a steam boiler room to research thermal efficiency, Energy 33 (2008) 1779–1787.
[14]
Harish Satyavada, Simone Baldi, Monitoring energy efficiency of condensing boilers via hybrid firstprinciple modelling and estimation, Energy 142 (2018) 121-129.
[15]
Robert Junga et al, Uncertainty estimation of the efficiency of small-scale boilers, Measurement 97 (2017) 186–194.
[16]
ZHUO Xunjia et al, ANALYSIS AND APPLICATION OF UNCERTAINTY IN ANTI—BALANCING THERMAL EFFICIENCY oF BoILERS, thermal power generation 1002—3364 (2012) 02—0032—05.
[17]
J. Wu, Y. Zhang, G. Xu, Y. Lin and X. Lv (2014) Research on the Optimization of Boiler Efficiency based on Artificial Bee Colony Algorithm, Computer and Information Science, 7, 30-38.
[18]
Z. Xunjia, L. Jingyan, W. Jiangwei and J. Lincan (2012) Analysis and Application of Uncertainty in Anti-Balancing Thermal Efficiency of Boilers, Thermal Power Generation, 2, 32-36.
[19]
P. Basu (2000) Boiler and burners, Springer, New York, USA, 11, 320-9.
[20]
L. Li (2017) Hot test report of a 220t/h CFB boiler after retrofit, Guang Dong Special Equipment Test and Research Institute, Guangdong University of Technology, Guangzhou, China.
[21]
Ren LQ. Test optimization techniques. 1st ed. Beijing: Machinery Industry Press of China; 1987.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186