Technical Innovation of Ultra-Deep Well Drilling Rig and Its Development Trend
International Journal of Oil, Gas and Coal Engineering
Volume 7, Issue 1, January 2019, Pages: 26-32
Received: Dec. 13, 2018;
Accepted: Jan. 3, 2019;
Published: Jan. 29, 2019
Views 804 Downloads 117
Fang Taian, CNPC Engineering Technology R&D Company Ltd., Beijing, China; National Engineering Laboratory for Oil and Gas Drilling Technology, Beijing, China
Zhou Zhixiong, CNPC Engineering Technology R&D Company Ltd., Beijing, China; National Engineering Laboratory for Oil and Gas Drilling Technology, Beijing, China
Wu Changliang, CNPC Engineering Technology R&D Company Ltd., Beijing, China; National Engineering Laboratory for Oil and Gas Drilling Technology, Beijing, China
Yang Xiaoguang, CNPC Engineering Technology R&D Company Ltd., Beijing, China; National Engineering Laboratory for Oil and Gas Drilling Technology, Beijing, China
Follow on us
8000-meter drilling rig and quadruple joint 9000-meter drilling rig have been developed for ultra-deep and complex wells of the complicated geological structure area in Tarim Basin, China. The key components of the drilling rigs are redesigned and innovated, including optimization of the high bearing capacity derricks and substructures and a completely new design of integrated single shaft drawworks with the compacted strand wire rope. The rotary table and its driving device with larger torque and load capacity, the high-pressure drilling pump with a high power, intelligent top drive system, casing running device with good compatibility, and automated pipe handling system are equipped. Field application shows that 8000 meters drilling rig, compared with the conventional 9000-meter drilling rig, can save equipment procurement costs by about 20%, reduce drilling operational costs 37%. In addition, the quadruple joint 9000-meter drilling rig can reduce the tripping time by more than 20%, and that the pressure is difficult to control in the complicated formation by conventional drilling rigs can be avoided to a certain extent. At the end of this paper, the advantages and the problems to be solved urgently of the ultra-deep well drilling rigs are expounded.
Ultra-Deep Drilling Rig, Quadruple Joint, Compacted Strand Wire Rope, Intelligent TDS, Casing Running Device, Automated Pipe Handling System
To cite this article
Technical Innovation of Ultra-Deep Well Drilling Rig and Its Development Trend, International Journal of Oil, Gas and Coal Engineering.
Vol. 7, No. 1,
2019, pp. 26-32.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Wang Haige, Ge Yunhua, Shi lin. Technologies in Deep and Ultra-Deep Well Drilling: Present Status, Challenges and Future Trend in the 13th Five-Year Plan Period (2016–2020) [J]. NATURAL GAS INDUSTRY, 2017, 37 (4): 1-8.
China's Ultra-Deep Drilling Rig Technology Has Advanced to A New Level. [J]. NATURAL GAS INDUSTRY, 2012, 40 (11): 58.
Xu Xiaopeng, Huang Yuehua, Li Zhiping, etc. Application of High Strength Materials in Derrick Substructure of Ultra-Deep Well Drilling Rig [J]. PETROLEUM MACHINERY, 2009, 37 (8): 72-75.
Chen Qing. The Drilling and hoisting system of CNPC Baoji Oilfield Machinery Co., ltd achieve full series coverage [N]. CHINA PETROCHEMICAL NEWS, 2010-01-28.
Huang Xianpu, Dang yuan, Gao Feng. YG-135 type integral traveling car hook design [J]. OIL FIELD EQUIPMENT, 1996, 25 (5): 11-16.
Yang Yuandong, Ma Shuxue, An Qinglong, et al. The Development and Application of the JC-15D Direct Drive Drawworks [J]. PETROLEUM MACHINERY, 2012, 40 (4): 34-37.
Zhang Xiaojie, Dong Hui, Jin Lumin, etc. [J]. Design And Analysis of 8000m DC Rigs Drawworks[J]. OIL FIELD EQUIPMENT, 2013, 42 (10): 57-60.
Yang Honggang, Zhou Yafang, Lu Yunhao, et al. Development and Application of ZP495 Rotary Table [J]. PETROLEUM MACHINERY, 2009, 37 (6): 45-47, 95.
Yi Zhou, Zhiqiang Huang, Yan Bu, etc. Simulation Studies on Drilling Mud Pump Plunger Seal Failure under Ultrahigh Pressure and Ultra-deep Conditions [J]. ENGINEERING FAILURE ANALYSIS, 2014.07.005, 2014, 45 (10):142-150.
Chen Ruheng. Breaking-up Old Concept, Creating New Drilling Rigs (Part 3) [J]. OIL FIELD MACHINERY, 2008, 37 (5): 1-9.
Xu Wen, Liu Xinli, Ma Rui, et al. Top Drive-based Steering Control Technology for Slide Drilling [J]. PETROLEUM MACHINERY, 2013, 41 (3): 27-30.
Wang Dingya, Wang Yaohua, Yu Xingjun. Research and Development Trend of Domestic Automated Drilling Rig [J]. PETROLEUM MACHINERY, 2017, 45 (5): 23-27.