A New Method for Analyzing the Dimension Error of Marine Steel Structures
International Journal of Oil, Gas and Coal Engineering
Volume 7, Issue 1, January 2019, Pages: 33-39
Received: Oct. 10, 2018;
Accepted: Jan. 23, 2019;
Published: Feb. 15, 2019
Views 637 Downloads 81
Meng Linghe, Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Zhang Shijian, Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Xiao Liquan, Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Wang Xuelian, Tianjin Ruiyang Offshore Engineering Co., Ltd., Tianjin, China
Yang Zilong, Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Wang Zhihong, Surveying Department, Offshore Oil Engineering Co., Ltd., Tianjin, China
Follow on us
With the strengthening of offshore oil exploitation, the construction of marine steel structures such as offshore oil platforms has been carried out on a large scale. During the construction process, the dimensional control and error analysis of marine steel structures is an important point. The dimensional error of marine steel structure is an important indicator reflecting the quality of marine steel structure construction. The marine steel structure is completed from structural design to offshore installation. The structural dimensional error must be strictly controlled and analyzed at each stage. It has important guiding significance for the design and construction of marine steel structure, ensuring final installation and safe production. Based on the summary of traditional size control and analysis methods, this paper introduces a new method of size control and analysis. The new method introduced in this paper uses the minimum two-passenger fitting technique, that is, the sum of all the deviation values is the smallest, so that the measured data can best match the design data, and the size error of the marine steel structure is represented by the magnitude and direction of the three-dimensional deviation. The three-dimensional deviation of each node is reflected objectively and actually, intuitive and reasonable, and the calculation program is written by AUTOCAD VBA, and the deviation value is quickly calculated, which has a good effect on on-site construction adjustment and error analysis.
Least Squares Coordinate Fitting, Design Data, Measured Data, Three-Dimensional Precision
To cite this article
A New Method for Analyzing the Dimension Error of Marine Steel Structures, International Journal of Oil, Gas and Coal Engineering.
Vol. 7, No. 1,
2019, pp. 33-39.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Yin Yongqiang, Dong Chao, Wang Jianxi, Wen Hailong. Discussion on the size control of marine steel structure construction process [C]. The 13th China Association for Science and Technology Annual Meeting Ocean Engineering Equipment Development Forum and 2011 Ocean Engineering Academic Annual Meeting Proceedings, 2012, 349-354.
Steel structure engineering construction specifications [S]. GB50755-2012.
Yang Yiwei. Discussion on Quality Control of Steel Structure Factory in Construction [J]. Commodity & Quality: Architecture & Development. 2012 (6): 74-74.
Engineering Measurement Specification [S]. GB50026-2007.
Lin Yuxiang. Control measurement [M], 2006.
Lai Jinfu, Yang Rui. Discussion on key technology of measurement of first-level control network of bridge engineering [J]. People's Yangtze River. 2015 (14): 73-93.
Cheng Zhengfeng, Song Weidong. Control measurement. Principles and methods of digital mapping., 2009.
Jin Yun. The layout of large bridge elevation control network. Urban road bridge and flood control [M].2009.
Liu Wengu, Zhang Weifu, You Yangsheng. Surveying [M]. 2018.
Department of Measurement and Adjustment, Wuhan University. Measurement Adjustment Foundation. 2007.
Department of Mathematics, Tongji University. Advanced Mathematics. 2007.
Tao Benzao, Qiu Weining, Huang Gana. Error Theory and Measurement Adjustment Foundation [M]. Wuhan: Wuhan University Press, 2003: 102-148.
Zhang Shijian, Liu Chunjie. A New Method for Accurate Measurement of Steel Pile Span of Jacket Frame [J], 2014, 26 (5): 92-95.
Liu Chunjie, Zhang Shijian. A method for detecting the overall size of jackets [J]. Surveying Engineering, 2014, 23 (2): 39-44.
Liu Chunjie, Zhang Shijian, Sun Yunhu. Method for detecting the spatial position of circular members of jackets in three-dimensional coordinate system [P], ZL201010115279.X. November 28, 2012.
Wu Bin, Ding Wen, Yang Fengting, Xue Ting. Research on Error Analysis Technology of Coordinate Measuring System for Non-orthogonal Axis Total Station [J]. Journal of Metrology. 2017, 06.