A New Design Methodology for Carrying Capacity of Hot Rolled I Section Steel of Local Buckling: The Overall Interaction Concept
American Journal of Civil Engineering
Volume 7, Issue 2, March 2019, Pages: 52-58
Received: Apr. 21, 2019;
Published: Jun. 15, 2019
Views 774 Downloads 151
Jiajing Liu, School of Civil Engineering, Chang’an University, Xi’an, China
Weining Yuan, School of Civil Engineering, Chang’an University, Xi’an, China
Hu Xiong, School of Civil Engineering, Chang’an University, Xi’an, China
Yihao Xu, School of Civil Engineering, Chang’an University, Xi’an, China
Follow on us
Through the finite element software ABAQUS, the finite element model considering the initial imperfection and residual stress is established, and the finite element results are compared with the collected test results to verify the reliability of the numerical model. By analyzing the ultimate carrying capacity of I section of axial compression with different aspect ratios, the design method of ultimate carrying capacity of axial compression members of hot rolled I section from thick to thin is studied. The result of Overall Interaction Concept (OIC) for hot rolled I section steel under axial compression is obtained by using the finite element calculation results, and the results are compared with the Eurocode (EN1993-1-1) and the Chinese steel structure design standard (GB50017-2017), so as to study the accuracy of the recommend design method. Results found that: i) the calculation result from EC3 of the cross section classification concept most conservative or unsafe, ii) the results from GB almost all conservative, iii) comparing with the existed design methods the OIC design method reflect the relationship between carrying capacity and the the generalized relative slenderness, that can accurately predict ultimate carrying capacity. Research shows that OIC is a more effective and accurate method.
Hot-Rolled I Section Steel, Ultimate Bearing Capacity, Overall Interaction Concept
To cite this article
A New Design Methodology for Carrying Capacity of Hot Rolled I Section Steel of Local Buckling: The Overall Interaction Concept, American Journal of Civil Engineering.
Vol. 7, No. 2,
2019, pp. 52-58.
EN 1993-1-1. Eurocode 3: Design of steel structures—Part 1–1: Classification of cross sections [S]. Brussels: European Committee for standardization (CEN); 2005.
American Institute of Steel Construction. Specification for Structural Steel Buildings: ANSI / AISC 360-10 [S]. Chicago, USA: American Institute of Steel Construction, 2010.
Ministry of construction of the People's Republic of China. Standards for steel structure design: GB 50017—2017 [S]. Beijing: China planning press, 2017.
Joanna Nseir. Development of a new design Method for The cross section Capacity of Steel of Hollow Section [D]. Universite de Liege, Liege, Belgique, 2015.
Yongzhen Li. Extension of Direct Strenth Mothed to Hot- rolled and Welded H profile cross-section [D]. Universite de Liege, 2014.
Bobo Wu. A new design method -- "overall interaction method" [J]. Construction engineering technology and design. 2017, 5 (134): 40-41.
Kettler M. Elastic-plastic cross-sectional resistance of semi-compact H-and hollow sections [D]. Technical University of Graz, 2008.
Andrew Foster. Stability and design of steel beams in the strain-hardening range [D]. Imperial College London, 2014.
Fancheng Cui, Changgen Deng, Yiyi. Chen. Elastic-plastic local buckling analysis of h-section axial compression steel members [C]. //Proceedings of the 14th (ISSF-2014) academic exchange and teaching seminar, structural stability and fatigue branch, China steel structure association. Tongji university, 2014: 122-128.
Liya Li. Study on section carrying capacity of cold-formed and hot-rolled rectangular tube steel members [D]. Xian: Master's thesis of Chang 'an university, 2017.
Changgeng Deng, Chenghui Zhang, Jiang Zhou. Elastoplastic related buckling analysis of h-section bending steel members [J]. Journal of Tongji university, 2016, 9 (44): 1307-131.