Effects of Crude Oil Contaminant on the Engineering Properties of Concrete
American Journal of Civil Engineering
Volume 3, Issue 5, September 2015, Pages: 178-182
Received: Oct. 15, 2015;
Accepted: Oct. 26, 2015;
Published: Nov. 16, 2015
Views 4815 Downloads 240
George Abednego, Department of Civil Engineering, Rivers State Polytechnic, Bori-Ogoni, Rivers State, Nigeria, West Africa
Onungwe Ishmael, Department of Civil Engineering, Rivers State Polytechnic, Bori-Ogoni, Rivers State, Nigeria, West Africa
Oba Achemie, Department of Civil Engineering, Rivers State Polytechnic, Bori-Ogoni, Rivers State, Nigeria, West Africa
Akpan Paul, Department of Civil Engineering, Rivers State Polytechnic, Bori-Ogoni, Rivers State, Nigeria, West Africa
Sarogoro Samuel, Department of Civil Engineering, Rivers State Polytechnic, Bori-Ogoni, Rivers State, Nigeria, West Africa
Follow on us
The artificial application of crude oil in various percentages in concrete mix constituent to under study the service interaction of concrete in contact with oil was carried out. The research contained herein present the investigation, analysis and comparative results obtained from a total of 96 concrete cubes sample consisting of 12 control cubes, 12 0% contaminated cubes cured in Bodo crude oil water and 72various percentages of crude oil contaminated cubes cured in potable water. The tests conducted were slump and flow rate in terms of freshly mixed concrete and compressive strength in terms of hardened content. The OPC concrete mix which adopted 0.5 water cement ratio was cured for 7, 14, 21 and 28 days in its cubes form and the results obtained indicated that concrete is highly susceptible when in contact with crude oil. Its contact with crude oil causes it to deterioration as well as slow strength development and increased percentage flow rate. The difference between the control mix and the 25% crude oil contamination was 16N/mm2 at 28 days, which explicitly spells out the consequences of crude oil effect on the properties of concrete structures.
Crude Oil, Contaminated Water, Compressive Strength, Slump, Concrete Flow Rate
To cite this article
Effects of Crude Oil Contaminant on the Engineering Properties of Concrete, American Journal of Civil Engineering.
Vol. 3, No. 5,
2015, pp. 178-182.
Copyright © 2015 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Ajagbe, W.O., Omokehinde, S. O., Agbede, O.A. and Alade, G.A. (2011).Effect of Crude Oil Impacted Sand on Compressive Strength of Concrete. Construction Building Materials, Vol. 26, Issue 1 pp 9-12.
Abdul-Ahad, R.B. and Muhammed, A.A. (2000).Compressive and Tensile Strength of Concrete Loaded and Soaked in Crude Oil, Engineering Journal of the University of Qatar, Vol. 13, pp 123-140.
Onabolu, O. A. (1989). Effect of Hot Crude Oil on Concrete Offshore Storage Application. PhD Thesis, University of London. pp: 298.
Matti, A. M. (1976). Some Properties and Permeability of Concrete in Direct Contact with Crude Oil. PhD Thesis, Sheffield University, UK pp: 230.
Ukoli, M. K. (2001). Environmental Factors in Management of the Oil and Gas Industry in Nigeria. Posted in web. http://www.warmfloor.co.uk/pages/environmentalpdfbrochure.pdf.
So O. and Nwankwo E.(2015).Effect Of Crude Oil Contamination On The Compressive Strength Of Concrete,Nigerian Journal of Technology, Vol. 34, No 2 (2015) pp 259-265 http://dx.doi.org/10.4314/njt.v34i2.7
Akinwumi I. I., Diwa D and Obianigwe N (2014). Effects of Crude Oil Contamination on The Index Properties, Strength and Permeability of Lateritic Clay, International Journal of Applied Sciences and Engineering Research, Vol. 3, Issue 4, 2014, Received on July. 12, 2014; Accepted on August 6, 2014; Published on Aug. 29, 2014 http://DOI:10.6088/ijaser.030400007
Wasiu A., Olusola S., Gabriel A. and Oluwole A. (2012). Effect of Crude Oil Impacted Sand on Compressive Strength of Concrete, Journal of Construction and Building Materials, 2012; 26(1):9–12.University of Ibadan, Ibadan, Nigeria http://DOI: 10.1016/j.conbuildmat.2011.06.028
British Standard Institution (1983).Method for Determination Slump Test. (BS 1881: Part 102) London: British Standard Institution.
British Standard Institution (1983).Method for Making Test Cubes from Fresh Concrete. (BS 1881: Part 1). London: British Standard Institution.
British Standard Institution (1989). Method for Determination Particle Size Distribution. (BS 1881: Part 103).London: British Standard Institution.
British Standard Institution (1983).Method for Determination Flow Table test. (BS 1881: Part 105) London: British Standard Institution.
British Standard Institution (1983).Method for Determination Compressive Strength of Concrete Cubes from Fresh Concrete. (BS 1881: Part 116).London: British Standard Institution.
Ejeh, S. P. and Uche, O. A. (2009).Effect of Crude Oil Spill on Compressive Strength of Concrete Materials. J Appl Sci Res: 17, 55-61.
Bangham, D. H. (1936).The Swelling and Shrinkage of Porous Materials and the Role of Surfaces in Determining Technical Strength. Symposium, Society of Chemical Industry; London. pp 269-333.