Optimization of Hydrogen Production from Nigerian Crude Oil Samples Through Continuous Catalyst Regeneration (CCR) Reforming Process Using Aspen Hysys
American Journal of Applied Chemistry
Volume 5, Issue 5, October 2017, Pages: 69-72
Received: May 25, 2017;
Accepted: Aug. 21, 2017;
Published: Sep. 21, 2017
Views 1307 Downloads 82
Ipeghan Jonathan Otaraku, Department of Chemical Engineering, University of Port Harcourt, Port Harcourt, Nigeria
Ishioma Laurene Egun, Department of Chemical Engineering, University of Port Harcourt, Port Harcourt, Nigeria
Follow on us
The aim of this paper is to increase the level of hydrogen produced in the refinery from heavy treated Naphtha of Nigerian crude oil during catalytic reforming process. An existing continuous catalyst regeneration catalytic reforming process plant with four beds reactor was simulated using Aspen Hysys while treated heavy Napthene from Bonga Crude and Bonny Crude were used as feed for the process. The temperature of reactors for the process was varied between 430 – 540°C and the outlet concentrations of hydrogen (Vol.%) produced was recorded. It was observed that an increase in temperature lead to an increase in the concentration of hydrogen produced as the volume of hydrogen at 430°C was 23.46% volume while at 540°C it was 51.38% volume showing a significant increase in the aromatic yield level. The results also showed that the naphthene content of feed affects the volume of hydrogen produced which made Bonga crude a better source for hydrogen when compared with Bonny crude.
Hydrogen Yield, Bonga Crude, Bonny Crude, Catalytic Reforming, Naphthene, Temperature
To cite this article
Ipeghan Jonathan Otaraku,
Ishioma Laurene Egun,
Optimization of Hydrogen Production from Nigerian Crude Oil Samples Through Continuous Catalyst Regeneration (CCR) Reforming Process Using Aspen Hysys, American Journal of Applied Chemistry.
Vol. 5, No. 5,
2017, pp. 69-72.
Copyright © 2017 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Chemistry Operations (15 December 2003). "Hydrogen", Los Alamos National Laboratory, Retrieved 5 February 2008.
Donghai Mei et al. Steam Reforming of Ethylene Glycol over MgAlO Supported Rh, Ni, and Co Catalysts, ACS Catalysis (2016). DOI: 10.1021/acscatal.5b01666.
Rostrup-Nielsen, J. R. Phys. Chem. Chem. Phys, 3 (2001) 283.
Jens R. Rostrup-Nielsen and Thomas Rostrup-Nielsen, Large-scale Hydrogen Production, CATTECH (2002) 6: 150. doi: 10.1023/A:1020163012266.
Zaidoon M. S., Optimization of Al-Doura Catalytic Naphtha Reforming Process Using Genetic Algorithm, Eng. &Tech. Journal Vol. 31, 2013, Part A, No. 7.
Shuichi K., Analysis of catalytic reforming characteristics of various Hydrocarbons, JSAE Annual congress No. 43-04, 2004.
Mohan L., Catalytic Reforming Process, Catalysts and Reactors 6th Summer School on Petroleum Refining & Petrochemicals Indian Institute of Petroleum Management Gurgaon, 2011, June 6-10.
Mohammad, R. R., Mitra J. and Davood I. (2013):“Progress in catalytic naphtha reforming process”. Applied Energy 109 79–93.
Exxon Mobil (2016): www.exxonmobilng.com
Chevron (2016): www.chevronng.com
Wordu, A. A., Dynamic Simulation of Industrial Reformer Reactors, International Journal of Engineering and Technology Volume 2 No. 7, July ISSN: 2049-3444, 2012 – IJET Publications UK.
Chang A. F, Kiran P., Y. A. Liu (2012): Refinery Engineering, Integrated Process Modeling and Optimization, Wiley-VCH Verlag GmBH and Co. KGaA, Boschstr., 12.69469 Weinheim, Germany.
Hu S. and Zhu X. X. (2004): Molecular Modeling and Optimization for Catalytic Reforming. Journal of Chemical Engineering Communications, Vol. 191, No. 4, pp 500-512 (13).