Flow Numerical Simulation in Various Technologies
International Journal of Mechanical Engineering and Applications
Volume 3, Issue 1-1, January 2015, Pages: 47-52
Received: Sep. 9, 2014; Accepted: Sep. 12, 2014; Published: Oct. 17, 2014
Views 2749      Downloads 165
Authors
Karel Adamek, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Pavel Peukert, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Jan Kolar, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Jozef Kaniok, TUL – Technical University in Liberec, Faculty of Textiles, Liberec, Czech Rep.
Jaroslav Pelant, VZLU – Aeronautical Research and Testing Institute, Prague, Czech Rep.
Martin Kyncl, VZLU – Aeronautical Research and Testing Institute, Prague, Czech Rep.
Jirí Storek, RIETER CZ – Ustí Nad Orlicí, Czech Rep.
Marcel Havrda, BRANO – Jablonec Nad Nisou, Czech Rep.
Article Tools
Follow on us
Abstract
This paper summarizes some examples of applications of flow numerical simulations in the area of various textile technologies and equipment, as for instance application of vortex tube, fibers production from melted polymer, chemical yarn texturizing by air flow, high-speed bearing. The examples are completed by cases from car industry – independent heater, cavitation in shock absorber.
Keywords
Flow Numerical Simulation, High-Speed Bearing, Melt-Blown, Vortex Tube, Yarn Texturizing, Cavitation, Independent Heater
To cite this article
Karel Adamek, Pavel Peukert, Jan Kolar, Jozef Kaniok, Jaroslav Pelant, Martin Kyncl, Jirí Storek, Marcel Havrda, Flow Numerical Simulation in Various Technologies, International Journal of Mechanical Engineering and Applications. Special Issue: Numerical Flow Simulations in Textile Industry. Vol. 3, No. 1-1, 2015, pp. 47-52. doi: 10.11648/j.ijmea.s.2015030101.18
References
[1]
M. E. Dejc, "Technical dynamics of gases", GEI Moscow, 1961 (in Russian).
[2]
J. Kaniok, "Melt-blown technology", diploma thesis, FT TU Liberec, 1998 (in Czech).
[3]
K. Adamek, "Chemical yarn texturizing by air flow", dissertation, TU Liberec, 1981 (in Czech).
[4]
K. Adamek, "Shock Waves as a Tool?", 2nd Int. Symp. on Exp. and Comput. Aerothermodynamics of Int. Flows, (Vol. 2, 109-114), Inst. of Thermomech. Acad. of Sciences Prague, 1993, ISBN 80-7015-384-9.
[5]
K. Adamek, "Shock waves affecting on yarns", Int. conf. Applic. of exp. meth. in fluid mech., VSDS Zilina, PieSťany, 1993 (in Czech).
[6]
K. Adamek, J. Pelant, "Luftstroemung im System fuer Faserbandvorbereitung", 8. Chemnitzer Textilmaschinen- tagung, 203-206, TU Chemnitz, 2001.
[7]
K. Adamek, J. Kolar, "Numerical flow simulations used in industrial problems", ECCOMAS 2012, (Europ. Congress on Comput. Meth. in Appl. Sciences and Engineering), TU Wien, ISBN 978-3-9502481-9-7.
[8]
J. Pelant, K. Adamek, M. Kyncl, "Application of the 3D NS equations for axis-symmetrical viscous turbulent flow", 6th ICCSM (Int. Congress of Croatian Society of Mechanics), Dubrovnik, 2009. ISBN 978-953-7539-11-5.
[9]
J. Pelant, K. Adamek, M. Kyncl, "Application of the NS equations for 3D viscous turbulent flow on bladeless fluid machines", 5th Europ. Congress on Comput. Meth. in Appl. Sciences and Engineering (ECCOMAS), Venice, Italy, 2008. ISBN 978-84-96736-55-9.
[10]
J. Kolar, K. Adamek, Optimization of damping unit, 6th int. conf. on Fluid Structure Interaction 2011, Wessex Inst. of Technology Southampton and University of Central Florida Orlando, Orlando, FL-USA, 2011, ISBN 978-1-84564-598.4.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186