Air Permeability, Drying, Blowing
International Journal of Mechanical Engineering and Applications
Volume 3, Issue 1-1, January 2015, Pages: 40-46
Received: Sep. 9, 2014;
Accepted: Sep. 12, 2014;
Published: Oct. 17, 2014
Views 2907 Downloads 163
Karel Adamek, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Jaroslav Fabera, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Milan Stejskal, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Antonín Havelka, TUL – Technical University in Liberec, Faculty of Textiles, Liberec, Czech Rep.
Stanislav Franc, VEBA – textilní zavody, Broumov, Czech Rep.
Follow on us
The paper summarizes some experience with air permeability modeling in the area of air filtering, clothes design, yarns dyeing, etc. Next part deals with surfaces blowing and drying, used in various branches of industry. The received results describe actual situation and give the direction of next progress in both research and plant operation.
Numerical Flow Simulation, Air Permeability, Filter Resistance, Cloth Permeability, Fabric Drying
To cite this article
Air Permeability, Drying, Blowing, International Journal of Mechanical Engineering and Applications. Special Issue: Numerical Flow Simulations in Textile Industry.
Vol. 3, No. 1-1,
2015, pp. 40-46.
K. Adamek, "Warming chamber for production of insulating panels", report VUTS Liberec, 2006 (in Czech).
K. Adamek, "Polycondensating chamber for production of insulating mats", report VUTS Liberec, 2007 (in Czech).
K. Adamek, "Fabric air permeability modeling", 13th Int. Conf. STRUTEX (Structure and Structural Mechanics of Textiles), TU Liberec, 2006. ISBN 80-7372-135-x.
K. Adamek, "Permeability of textile layers", XVIth Int. conf. Applic. of exp. and numer. meth. in fluid mech.. ZU Zilina, 2008. ISBN 978-80-8070-826-9 (in Czech).
K. Adamek, "Luftdurchlaessigkeit der Textilien", Chemnitzer Textitechniktagung, 2008.
M. Havrdova, "Permeability evaluation of clothing materials", PhD thesis, FT TU Liberec, 2004 (in Czech).
L. Sindelkova, "Relation between cloth permeability and binding", diploma thesis, FT TU Liberec, 2007 (in Czech).
R. Subert, "Textiles permeability at higher flow velocities", PhD thesis, FT TU Liberec, 2006 (in Czech).
A. Halasova, "Evaluation of permeability of textile sandwiches under conditions of high air velocity speeds", PhD thesis, FT TU Liberec, 2007 (in Czech).
K. Adamek, "Device for permeability measuring of wound bobbin", Czech utility design, 2014.
J. Fabera, M. Stejskal, K. Adamek, "Application of thermovision to evaluating heating unevenness of fabric during drying and to comparing drying performances", 13th Conf. Strutex, TU Liberec, 2006. ISBN 80-7372-135-x.
M. Stejskal, M., K. Adamek, J. Fabera, "Study of new principles of impact drying and development of new jet systems of drying machines", report VUTS Liberec, grant No. VCT2 (TS), 2009 (in Czech).
K. Adamek, "Intensives Blasen der Oberflaechen" In: TRANSCOM 2003, ZU Zilina, ISBN 80-8070-085-0.