Wall Flows and their Applications
International Journal of Mechanical Engineering and Applications
Volume 3, Issue 1-1, January 2015, Pages: 28-32
Received: Sep. 9, 2014; Accepted: Sep. 12, 2014; Published: Oct. 17, 2014
Views 3089      Downloads 197
Authors
Karel Adamek, VUTS – Centre of Machinery Research, Liberec, Czech Rep.
Dusan Cejka, KBA- Grafitec, Dobruska, Czech Rep.
Zdeněk Mecl, PEGAS Nonwovens, Znojmo, Czech Rep.
Jaroslav Pelant, VZLU – Aeronautical Research and Testing Institute, Praha, Czech Rep.
Article Tools
Follow on us
Abstract
So-called wall flows are usable in many technical applications as a simple and reliable device for exhausting of light materials as dust, smoke, hot air, etc. In another cases, such flows can make troubles by treatment of light materials as fibers, etc. and it is necessary to suppress the wall effects by suitable design adjustments. But there is described a useful effect of wall flows on quality of fibrous product, too.
Keywords
Numerical Flow Simulation, Wall Effect, Wall Flow
To cite this article
Karel Adamek, Dusan Cejka, Zdeněk Mecl, Jaroslav Pelant, Wall Flows and their Applications, International Journal of Mechanical Engineering and Applications. Special Issue: Numerical Flow Simulations in Textile Industry. Vol. 3, No. 1-1, 2015, pp. 28-32. doi: 10.11648/j.ijmea.s.2015030101.15
References
[1]
J. Pelant, K. Adamek, "Flow around moving surface", ECCOMAS (Europ. Congress on Comput. Meth. in Appl, Sciences and Engineering), University of Jyvaskyla, Finland, 2004. ISBN ….
[2]
J. Pelant, K. Adamek, "Luftstroemung entlang des rotierenden Kardenbelags", Chemnitzer Textilmachinen-Tagung, TU Chemnitz, BRD, 2003. ISBN …
[3]
K. Adamek, J. Pelant, "Velocity field around rotating surfaces, "XXIInd. int. conf. of departments of thermomech. and fluid mech., Doubice, 2003, ISBN 80-8073-710-1 (in Czech).
[4]
K. Adamek, J. Kolar, "Influence of the induced airflow on calendering", EFM11 (Experimental Fluid Mechanics). TU Liberec, JiCin, 2011. ISBN 978-80-7372-784-0.
[5]
K. Adamek, "Einfluss der induzierten Luftstroemung beim Kalandrieren", Chemnitzer Textiltechnik Tagung, TU Chemnitz, 2011, ISBN 978-3-9812554-7-8.
[6]
K. Adamek, J. Kolar, "Numerical flow simulations used in industrial problems", ECCOMAS (Europ. Congress on Comput. Meth. in Appl. Sciences and Engineering). TU Wien, Austria, 2012, ISBN 978-3-9502481-9-7.
[7]
K. Adamek, J. Kolar, "Induced airflow around the calendering drums", Int. Journal of. Mechan. Eng. and Applic. Science PG, 2013, ISSN 2330-0248, ISSN 2330-023x.
[8]
K. Adamek, J. Zak, P. Kavan, P. Sidlof, J. Kolar, "Contactless pressing of a sheet", EFM13 (Experimental Fluid Mechanics), TU Liberec, Kutna Hora, 2013, ISBN 978-80-260-5375-0.
[9]
J. Bukovsky, "Wall effect applications" Int. conf. Applic. of exp. meth. in fluid. mech., VSDS Zilina, 1984 (in Czech).
[10]
K. Adamek, "Automatic weft repair", report VUTS Liberec, 1996, applied on air jet looms Camel, Vega etc. VUTS Liberec, 2000.
[11]
Utility design No. CZ - 2012-25916: Zarizeni pro upravu netkane textilie (Device for treating of nonwoven layer), 25.06.2012.
[12]
Utility design No. DE202012012256: Einrichtung zur Behandlung eines Vliesstoffs, 2013-02-27.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186