Main Weaving Nozzles - Ejectors
International Journal of Mechanical Engineering and Applications
Volume 3, Issue 1-1, January 2015, Pages: 5-12
Received: Sep. 9, 2014; Accepted: Sep. 12, 2014; Published: Oct. 17, 2014
Views 3582      Downloads 211
Authors
Karel Adamek, VÚTS – Centre of Machinery Research, Liberec, Czech Rep
Jan Kolar, VÚTS – Centre of Machinery Research, Liberec, Czech Rep
Jaroslav Pelant, VZLÚ – Aeronautical Research and Testing Institute, Praha, Czech Rep
Jan Simak, VZLÚ – Aeronautical Research and Testing Institute, Praha, Czech Rep
Simone Gramsch, Fraunhofer ITWM, Kaiserslautern, Germany
Article Tools
Follow on us
Abstract
The paper deals both with numerical flow simulations and experiments in ejectors, used here first of all as main weaving nozzles, further as a source of air suction, etc. The problem of high noise level of expanded air flow is discussed, too.
Keywords
Numerical Flow Simulation, Ejector, Weaving Nozzle, Aerodynamic Noise
To cite this article
Karel Adamek, Jan Kolar, Jaroslav Pelant, Jan Simak, Simone Gramsch, Main Weaving Nozzles - Ejectors, International Journal of Mechanical Engineering and Applications. Special Issue: Numerical Flow Simulations in Textile Industry. Vol. 3, No. 1-1, 2015, pp. 5-12. doi: 10.11648/j.ijmea.s.2015030101.12
References
[1]
K. Adamek,"Conditions for High-quality and Reliable Air Jet Weft Insertion", Vlákna a textil (Fibers and textiles – in Czech) 5(3), 123-130 (1998), ISSN 1335-0617.
[2]
K. Adamek, "Conditions for High-quality and Reliable Air Jet Weft Insertion", 2nd int. conf. Novelties in weaving research, TU Liberec, 1998 (EU project Copernicus).
[3]
K. Adamek, "Numerical modelling the air flow in parts of air jet loom", CAMES (Comput. Assist. Mech. and Eng. Sciences), special issue, 6, 251-263, 1999, Polish Academy of Sciences Warsaw.
[4]
K. Adamek, "Numerical modelling the air flow in parts of air jet loom", 8th int. conf. on numer. math. and comput. mech. (NMCM98), University of Miskolc, Hungary, 1998.
[5]
J. Pelant, K. Adamek, "Boundary value conditions for some 3D axis-symmetrical flow", Proc. ECCOMAS CFD 2001, University of Wales, Swansea, 2001, ISBN 0-905091-11-6.
[6]
K. Adamek, "Numerical modelling of air flow in air jet weaving system", Internat. J. Polymeric. Mater., 2000, Vol. 47, pp. 613-623, ISSN ….
[7]
K. Adamek, "Numerical modelling of air flow in air jet weaving system", 32nd internat. symp. on novelties in textiles, University of Ljubljana, 1998, ISBN 961-6045-11-3.
[8]
K. Adamek, "Numerical modelling of the flow effect on the weft during air jet weaving", VII. Internat. Congress on the Theory of Machines and Mechanisms, TU Liberec, 1996, ISBN 80-7083-198-7 (in Czech).
[9]
K. Adamek, "Flow description in the air jet weaving system by FVM", Quo vadis textrinum, NMC Zilina, Strbske Pleso, 1996, ISBN 80-856655-06-3 (in Czech).
[10]
K. Adamek, "Experience with FVM in Research of Air Jet Weaving System", Computer Modeling and Simulation in Engineering (CMSE), Vol. 1, Sage Science Press, 1996.
[11]
K. Adamek, "Beschreibung der Webduesenstroemung mit FVM", 5. Chemnitzer Textilmaschinen-Tagung, TU Chemnitz, 1995.
[12]
K. Adamek, "Design of parts for air jet weft insertion by FVM", Int. Conf. Young textile science, TU Liberec, 1995.
[13]
K. Adamek, "Flow description in the air jet weaving system by FVM", Xth. sci. conf. Applic. of exp. meth. in fluid mech., VSDS Zilina, Strba, 1995 (in Czech).
[14]
K. Adamek, "Le tissage a jet d’air", seminaire IMST, Univ. Marseille, 1994.
[15]
J. Kolar, K. Adamek, V. Dvorak, "Aeroacoustic of jet induced noise", Conference of fluid- and thermomechanics departments on technical universities, 2009 (in Czech).
[16]
J. Kolar, K. Adamek, "Aeroacoustic of simple shaped nozzles", EFM 2009 (Exp. Fluid Mech.), TU Liberec, Jicin, 2009, ISBN 978-80-7372-538-9.
[17]
J. Simak, "Aeroacoustic analysis of circular nozzle", Transfer, VZLÚ Praha, No. 15, vol. 6, 2011. ISSN 1801-9315 (in Czech).
[18]
K. Adamek, "Air flows in nozzles of air jet looms", VIth sci. conf. Applic. of exp. meth. in fluid mech. VSDS Zilina, Jasna, 1987 (in Czech).
[19]
K. Adamek, "Applications of numerical flow modeling in designer’s practice", XIVth int. conf. Applic. of exp. and numer. meth. in fluid mech., ZU Zilina, 2004. ISBN 80-8070-234-9 (in Czech).
[20]
V. Tesar, "Reversation paradox", Acta technica. ČVUT Praha, 1984 (in Czech).
[21]
K. Adamek, J. Pelant, "Reversation flow in ejector", XVIIth sci. conf. Applic. of exp. and numer. meth. in fluid mech. ZU Zilina, Bojnice 2010. ISBN 978-80-554-0189-8 (in Czech).
[22]
J. Kolar, K. Adamek, J. Pelant, "Reversation flow in an ejector", Strutex, TU Liberec, 2010. ISBN 978-80-7372-664-5.
[23]
S. Gramsch, D. Hietel, "Fadenschuss mittels Luftstrom", report of the Fraunhofer ITWM Kaiserslautern
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186