Combustion in Micro Channel Investigating the Effect of Wall Thermal Conductivity of Micro-Channels on Flame Stability
International Journal of Science, Technology and Society
Volume 3, Issue 1, January 2015, Pages: 24-27
Received: Oct. 13, 2014;
Accepted: Dec. 30, 2014;
Published: Jan. 23, 2015
Views 3230 Downloads 182
Zafar Namazian, Faculty of Engineering, Department of Mechanical Engineering, Yasouj Branch, Islamic Azad University, Yasouj, Iran
Heidar Hashemi, Department of Mechanical Engineering, College of Engineering, Yasouj University, Yasouj, Iran
Jafar Namazian, Faculty of Engineering, Department of Mechanical Engineering, Yasouj Branch, Islamic Azad University, Yasouj, Iran
In this work, the computational fluid dynamics is used to model a micro torch. This is to investigate the effect of wall conductivity for different operating conditions on combustion characteristics as well as flame stability. The effect of convective heat transfer coefficient on the flame stability, out of the burner, is also studied. The results show that the wall conductivity and the convective heat transfer coefficient are very important to determine heat transfer to upstream. Finally, it is observed that if intermediate conductivity value of a wall is used, it can produce more stable combustion flame. In contrary, in very low and high conductivity, the flame becomes unstable. If the convective heat transfer coefficient of the outer fluid increases, flame becomes unstable again.
Combustion in Micro Channel Investigating the Effect of Wall Thermal Conductivity of Micro-Channels on Flame Stability, International Journal of Science, Technology and Society.
Vol. 3, No. 1,
2015, pp. 24-27.
Sitzki, L., K. Borer, E. Schuster, P. D. Ronney, and S. Wussow, "Combustion in microscale heat-recirculating burners," in The Third Asia-Pacific Conference on Combustion, 2001, pp. 11-14.
Aghalayam, P. and D. Vlachos, "The roles of thermal and chemical quenching in NOx and fuel emissions: Combustion of surface-stabilized hydrogen/air mixtures," AI Ch. E. Journal, vol. 44, (1998), pp. 2025-2034.
Mujeebu, M. A., M. Abdullah, M. Bakar, A. Mohamad, R. Muhad, and M. Abdullah, "Combustion in porous media and its applications–a comprehensive survey," Journal of environmental management, vol. 90, (2009), pp. 2287-2312.
Hashemi, H., A. M. Shaharoun, and I. Sudin, "A case-based reasoning approach for design of machining fixture," The International Journal of Advanced Manufacturing Technology, 2014), pp. 1-12.
Dunn-Rankin, D., E. M. Leal, and D. C. Walther, "Personal power systems," Progress in Energy and Combustion Science, vol. 31, (2005), pp. 422-465.
Fernandez-Pello, A. C., "Micropower generation using combustion: issues and approaches," Proceedings of the Combustion Institute, vol. 29, (2002), pp. 883-899.
Kang, K., Y. S. Meng, J. Breger, C. P. Grey, and G. Ceder, "Electrodes with high power and high capacity for rechargeable lithium batteries," Science, vol. 311, (2006), pp. 977-980.
Hashemi, H., A. Mohamed Shaharoun, S. Izman, and D. Kurniawan, "Recent Developments on Computer Aided Fixture Design: Case Based Reasoning Approaches," Advances in Mechanical Engineering, vol. 2014, (2014), p. 15.
Davy, H., "Some researches on flame," Philosophical Transactions of the Royal Society of London, vol. 107, (1817), pp. 45-76.
Saiki, Y. and Y. Suzuki, "Effect of wall surface reaction on a methane-air premixed flame in narrow channels with different wall materials," Proceedings of the Combustion Institute, vol. 34, (2013), pp. 3395-3402.
Sun, W., S. H. Won, T. Ombrello, C. Carter, and Y. Ju, "Direct ignition and< i> S-curve transition by< i> in situ nano-second pulsed discharge in methane/oxygen/helium counterflow flame," Proceedings of the Combustion Institute, vol. 34, (2013), pp. 847-855.
Vlachos, D. G., L. D. Schmidt, and R. Aris, "Ignition and extinction of flames near surfaces: Combustion of CH4 in air," AIChE journal, vol. 40, (1994), pp. 1005-1017.
Linan, A. and F. A. Williams, "Fundamental aspects of combustion," 1993),
Masel, R. I. and M. A. Shannon, "Microcombustor having submillimeter critical dimensions," ed: Google Patents, 2001.
Chen, J., L. Yan, and W. Song, "Numerical simulation of micro-scale catalytic combustion characteristics with detailed chemical kinetic reaction mechanisms of hydrogen/air," Reaction Kinetics, Mechanisms and Catalysis, 2014), pp. 1-19.
Raimondeau, S., D. Norton, D. Vlachos, and R. Masel, "Modeling of high-temperature microburners," Proceedings of the Combustion Institute, vol. 29, (2002), pp. 901-907.