Design of PWM Amplifier Drive Module in Radar Servo System
Volume 7, Issue 5, October 2019, Pages: 341-346
Received: Nov. 7, 2019;
Published: Dec. 3, 2019
Views 435 Downloads 52
Ying Han, The 20th Research Institute of China Electronics Technology Group Corporation, Xi’an, China
Xu Zhang, The 20th Research Institute of China Electronics Technology Group Corporation, Xi’an, China
Weifeng Quan, The 20th Research Institute of China Electronics Technology Group Corporation, Xi’an, China
Nan Li, School of Automation, Northwestern Polytechnical University, Xi’an, China
Follow on us
In this paper, a PWM (Pulse width modulation) amplifier drive module in radar servo system has been designed. It’s the core of the drive and made up of rectifier filtering circuit and IPM. The rectifier filtering circuit produces the DC bus voltage by rectifying and filtering the single 220V50Hz AC current. The IPM receives the control signal from the control module and makes the DC bus voltage inverted into the three-phase AC voltage to drive the motor. At the same time, the protection design and software design has been given. This system has high accuracy, good quick response features and strong dynamic carrying interference capability. It has been the driving form which is used in widest in the high-precision servo control area.
PWM Amplifier Drive Module, The Rectifier Filtering Circuit, The Drive Protection Design, The Drive Software Design
To cite this article
Design of PWM Amplifier Drive Module in Radar Servo System, Science Discovery.
Vol. 7, No. 5,
2019, pp. 341-346.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.