The Preparation and Experimental Research for Inner Cladding Casting of Al-Al
Volume 5, Issue 7, December 2017, Pages: 515-518
Received: Dec. 28, 2017;
Published: Dec. 28, 2017
Views 1013 Downloads 59
Zeng Li-kui, College of Intelligent Manufacturing and Automobile, Chongqing Technology and Business College, Chongqing, China
Yang Ping, College of Intelligent Manufacturing and Automobile, Chongqing Technology and Business College, Chongqing, China
Wang Yajun, College of Material Science and Engineering, Chongqing University, Chongqing, China
Follow on us
With the rapid development of science and technology, the unceasing enhancement of component integration degree, and the increasingly demanding of parts using conditions, the part that the traditional metal materials and alloy materials preparation is hard to meet the requirements of the use of some special conditions, so the new composite materials have been paid attention to by the countries all over the world. An casting method for Inner Cladding Casting was introduced. By the use of this method, the Al-Al inner cladding casting which has the transition layer in the middle was prepared, it was indicated that the casting method for inner cladding casting has the feasibility. Through the soaking experiments of three group samples which were Arc Spraying Al layer、substrate of Al and Inner Cladding Casting of Al-Al, we find out that by 140h soaking experiments for inner cladding casting of Al-Al the porosity change was little and it had shown very good corrosion resistant effect.
Al-Al, Arc Spraying, Inner Boundary, Cladding
To cite this article
The Preparation and Experimental Research for Inner Cladding Casting of Al-Al, Science Discovery.
Vol. 5, No. 7,
2017, pp. 515-518.
A. Okuno, H. Kawano, J. Sun, M. Kurokawa, M. Nalkoka. Feasible Development of Soft—Switdled Sit Invener vith Load-adaptive Frequency-Tracking Control Scheme for Induction Heating [J]. IEEE—Transactions on industry Applications, 1998, 35(6): 713-718.
Mario Tama, Development of channel of core Type Iduction Furnaces [J], Industrial Heating, 1974(6): 43-45.
D, V, AlexaIldro, solidification with a Quasiequilibrium Two-phase zone [J], Acta mater, 2001, 49(4): 759-764.
Hashi M M, Otomo S, DeVdopmet of High Performance Roll by continuous Pouring Process for Cladding [J]. ISIJ, 1992, 11(32): 202-203.
KISH ITAKE K. Thermal sp rayed Fe210Cr213P27C amorphous coatings possessing excelled corrosion resistance [J]. Journal of Thermal Sp raing Thchnology, 1996, 5(4):476-481.