Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit
International Journal of Sustainable and Green Energy
Volume 5, Issue 1, January 2016, Pages: 8-12
Received: Feb. 2, 2016;
Accepted: Feb. 17, 2016;
Published: Mar. 1, 2016
Views 4571 Downloads 220
Nwogu Chukwunonso, Department of Mechanical Engineering, Michael Okpara University of Agriculture Umudike, Umuahia, Nigeria
This paper assessed the quality of biodiesel produced by the improved biodiesel plant. This was achieved by determining some physical properties of the biodiesel produced. The properties tested include: kinematic viscosity, specific gravity, flash point, fire point, cloud point and pour point, with their respective values determined as 5.260, 0.880, 124°C, 128°C, 4.5°C and -2°C. Comparison with ASTM D-6751, EN 14214 and Australian standards for biodiesel showed that the values obtained fall within acceptable limits. Furthermore, B5, B10, B20 and B30 blends of the biodiesel were prepared using direct blending method. The physical properties of the respective blends were also determined and the results showed that blending the biodiesel with petroleum based diesel improved its quality.
Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit, International Journal of Sustainable and Green Energy.
Vol. 5, No. 1,
2016, pp. 8-12.
Copyright © 2016 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Alamu O. J., Waheed M. A. and Jekayinfa S. O. “Alkali-catalysed Laboratory Production and Testing of Biodiesel Fuel from Nigerian Palm Kernel Oil”. Agricultural Engineering International, 2007, 9: 1-11.
Aransiola E. F., Daramola M. O. and Ojumu T V. “Nigeria Jatrophacurcasoil seeds: prospects for biodiesel production in Nigeria”. International Journal of Renewable Energy Research. 2(2), 2012, 317–325.
Akoh C. C., Chang S., Lee G. and Shaw J. “Enzymatic approach to biodiesel production”. J. Agric. Food Chem. 55, 2007, 8995 – 9005.
Berchmans H. J. and Hirata S. Biodiesel production from crude Jatrophacurcas L. seed oil with a high content of free fatty acids. Bioresource Technology, 2008.
Robles-Medina A., Gonzalez-Moreno P. A., Esteban –Cerdán L and Molina-Grima E. “Biocatalysis: Towards evergreener biodiesel production”. Biotechnol. Adv. 27, 2009, 398-408.
Hasibuan S., Ma’ruf A. and Sahirman. Biodiesel from low grade used frying oil using esterification transesterification process. MakaraSains 13(2), 2009, 105-110.
Knothe, G. “Analyzing biodiesel: Standards and other methods”. Journal of American Oil Chemists Society, 83(10), 2006, 823-833.
Kemp, W. H. Biodiesel: Basics and beyond: A comprehensive guide to production and use for the home and farm. Tamworth, Ont.: Aztext Press, 2006.
Nwogu Chukwunonso. “Design and Development of an Industrial Centrifuge for Small and Medium Scaled Industries”, Innovative Systems Design and Engineering, ISSN 2222-1727 Vol. 6, No. 10, 2015, 1-9.
Nwogu C. N. and Obi A. I. “Development of an Improved Biodiesel Plant”, International Journal of Science and Research (IJSR) ISSN (Online), 2015, 2319-7064.
Okoro L., Sedoo V. Belaboh, Nwakama R. Edoye and Bella Y. Makama. “Synthesis, Calorific and Viscometric Study of Groundnut Oil Biodiesel and Blends”, Research Journal of Chemical Sciences ISSN 2231-606, 2011.
Emil A., Z. Yaakob, S. K. Kamarudin, M. Ismail and J. Salimon. “Characteristics and composition of jatropha curcas oil seed from Malaysia and its potential as biodiesel feedstock”. Eur. J. Sci. Res, 29, 2009, 396-403.
Samuel O. D., Waheed M. A., Bolaji B. O. and Dario O. U. “Production of Biodiesel from Nigerian Restaurant Waste cooking oil using Blender”, International Journal of Renewable Energy Research Vol. 3, No. 4, 2013.