Energy Recovery from Exhaust Air of Textile Industry
International Journal of Sustainable and Green Energy
Volume 3, Issue 4, July 2014, Pages: 82-86
Received: Jul. 25, 2014; Accepted: Aug. 13, 2014; Published: Aug. 30, 2014
Views 3242      Downloads 383
Mehari Weldemariam Degefa, Ethiopian Institute of Textile and Fashion Design, Bahir Dar University, Bahir Dar, Ethiopia
Solomon Tesfamariam Teferi, School of Mechanical and Industrial Engineering, Institute of Technology-Bahir Dar University, Bahir Dar, Ethiopia
Article Tools
Follow on us
A system to recover part of the energy of exhaust air from an axial fan of 75kW using a Horizontal Axis Wind Turbine is discussed in this paper. The actual air data at the fan outlet are collected from central air conditioning station of a composite textile mill (Kombolcha Textile Share Company) using log-Tchebycheff method. Since the air flow type determines the steps in progress the air flow type is arithmetically found to be fully turbulent. A duct is designed to correct the air turbulence and transport the exhaust air from the fan to the turbine. The enclosure duct design is developed in consideration of the actual situation of the company to attain a fully developed region where the air speed attains a uniform velocity profile and create a venturi effect (to increase the air speed) for better energy output and guide the air before it interacts with the wind turbine blades. By turning what was exhausted to useable form 5.7kW of electric power can be harvested. As there are vast application areas of industrial air system, utilizing the exhaust from such air systems as energy resource could be helpful and used as supplementary power for industry production floor lighting and little power supply requiring auxiliary processes.
Exhaust Air, Wind Turbine, Energy Recovery, Clean Energy
To cite this article
Mehari Weldemariam Degefa, Solomon Tesfamariam Teferi, Energy Recovery from Exhaust Air of Textile Industry, International Journal of Sustainable and Green Energy. Vol. 3, No. 4, 2014, pp. 82-86. doi: 10.11648/j.ijrse.20140304.12
Reay, D. 1979. Heat recovery systems –Adirectory of equipment and techniques.E&F N Spon Ltd.
Solar and Wind Energy Utilization andProject Development ScenariosOctober 2007
Federal Democratic Republic of EthiopiaMinistry of Water and Energy Scaling upRenewable Energy Program EthiopiaInvestment Plan, January 2012.
TSI AIR FLOW Instruments Ltd.[online]. Available at: [accessed 21st April 2013]
Chaniotakis, E. (2001), MSc. Thesis on Energy Systems and the Environment, Department of Mechanical Engineering University of Strathclyde
A study on weibull distribution for estimating The parameters (Paritosh BHATTACHARYA CEM, Kolaghat, Midnapore, India)
Johnson, G. L., 1986. Wind Energy Systems, Prentice – Hall Inc, New Jersey, USA. p1-3.
Installation do’s and dont’s©FANTECH2008.
Jagstorf B. Renewable Engineering and Development, Brochure toaccompany mobile exhibition on renewable engineering in Ethiopia, Factorfour Energy projects GmbH
Agbeko, E.K, 2005. MSc thesis on Small Scale Wind Turbines, University of Strathclyde, Department of Mechanical Engineering.
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
Tel: (001)347-983-5186