International Journal of Energy and Power Engineering
Volume 7, Issue 5, October 2018, Pages: 54-58
Received: Oct. 12, 2018;
Accepted: Oct. 31, 2018;
Published: Nov. 19, 2018
Views 296 Downloads 53
Tie Geng, School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, China; Oilfield Chemicals R&D Institute, COSL, Sanhe, China
Zhengsong Qiu, School of Petroleum Engineering, China University of Petroleum (East China), Qingdao, China
Hailong Miao, Oilfield Chemicals R&D Institute, COSL, Sanhe, China
Wei Zhang, Oilfield Chemicals R&D Institute, COSL, Sanhe, China
Ke Lei, Oilfield Chemicals R&D Institute, COSL, Sanhe, China
In offshore deepwater drilling, because of the low temperature aroud seafloor, the conventional synthetic-based drilling fluid becomes very thick, resulting in severe loss of drilling fluid during drilling through the deepwater formations with a narrow safe-density window. Therefore, it is important to improve the rheological properties of drilling fluid at deepwater drilling conditions. In this work, by investigating the effects of the key components including the base oil, emulsifier, wetting agent and rheology modifier on the rheological properties of synthetic-based drilling fluid at 4°C to 65°C, the optimal additives were selected, and a synthetic-based drilling fluid with flat-rheology characteristics was developed. It was found that the gas-to-liquid oil had low viscosity at a low temperature, and was suitable for preparing deepwater drilling fluids. The evaluation experiments show that at 4°C to 65°C, the drilling fluid could maintain stable yield point, 10-min Gel and 6 r/min reading value at a density of 0.9-1.5 g/cm3 even after high temperature aging, while the rheological properties of the conventional synthetic-based drilling fluid were significantly influence by the low temperature. Moreover, it showed excellent performance in filtration reduction and shale inhibition, and could maintain good properties even being contaminated by seawater. Therefore, its stable rheological properties at the deepwater drilling temperature range can effectively control the equivalent circulating density, thus reducing the risk of drilling fluid loss during deepwater drilling.
Performance Evaluation of Synthetic-Based Drilling Fluid with Flat Rheology, International Journal of Energy and Power Engineering.
Vol. 7, No. 5,
2018, pp. 54-58.
Zhao X, Qiu Z, Huang W, et al. Mechanism and method for controlling low-temperature rheology of water-based drilling fluids in deepwater drilling. Journal of Petroleum Science and Engineering, 2017, 154: 405-416.
Davison J M, Clary S, Saasen A, et al. Rheology of various drilling fluid systems under deepwater drilling conditions and the importance of accurate predictions of downhole fluid hydraulics. SPE 56632. SPE Annual Technical Conference and Exhibition, 3-6 October, Houston, Texas, USA, 1999.
Zamora M, Broussard P N, Stephens M P. The top 10 mud-related concerns in deepwater drilling operations. SPE 59019. SPE International Petroleum Conference and Exhibition in Mexico, 1-3 February, Villahermosa, Mexico, 2000.
Herzhaft B, Peysson Y, Isambourg P, et al. Rheological properties of drilling muds in deep offshore conditions. SPE/IADC 67736. SPE/IADC Drilling Conference, 27 February-1 March, Amsterdam, Netherlands, 2001.
Dokhani V, Ma Y, Yu M. Determination of equivalent circulating density of drilling fluids in deepwater drilling. Journal of Natural Gas Science and Engineering, 2016, 34, 1096-1105.
Van Oort E, Lee J, Friedheim J, et al. New flat-rheology synthetic-based mud for improved deepwater drilling. SPE 90987, 2004.
Rojas J C, Bern P, Plutt L J, et al. New constant-rheology synthetic-based fluid reduces downhole losses in deepwater environments. SPE 109586. SPE Annual Technical Conference and Exhibition, 26-29 September, Houston, Texas, USA, 2007.
Knox D, Bulgachev R, Cameron I. Defining Fragile-The Challenge of Engineering Drilling Fluids for Narrow ECD Windows. SPE/IADC 173059. SPE/IADC Drilling Conference and Exhibition, 17-19 March, London, England, UK, 2015.
Schlemmer R, Phoon G, Lumpur K. A new generation associative polymer extends temperature stability of deepwater drilling fluid. IPTC 15383. International Petroleum Technology Conference, 15-17 November, Bangkok, Thailand, 2011.
Young S, Friedheim J, John Lee, et al. A new generation of flat rheology invert drilling fluids. SPE 154682. SPE Oil and Gas India Conference and Exhibition, 28-30 March, Mumbai, India, 2012.
Huang W, Leong Y K, Chen T, et al. Surface chemistry and rheological properties of API bentonite drilling fluid: pH effect, yield stress, zeta potential and ageing behaviour. J. Petro. Sci. Eng. 2016, 146, 561-569.
Zhao X, Qiu Z, Xu J, et al. Flat-rheology oil-based drilling fluid for deepwater drilling. International Journal of Heat and Technology, 2017, 35(1): 19-24.
Zhong H, Qiu Z, Huang W, et al. Bis (hexamethylene) triamine as potential shale inhibitor in water-based drilling fluid. Open Petroleum Engineering Journal, 2013, 6(1), 49-56.
Zhong H, Sun D, Huang W, et al. Effect of cycloaliphatic amine on the shale inhibitive properties of water-based drilling fluid. The Open Fuels & Energy Science Journal, 2015, 8, 19-27.