Technical Innovation of Contactor Applications (TICA)
Advances in Networks
Volume 7, Issue 2, December 2019, Pages: 37-44
Received: Oct. 21, 2019;
Accepted: Nov. 21, 2019;
Published: Nov. 26, 2019
Views 522 Downloads 95
Samuel Llewellyn Davies, Department of Electrical/Electronic Engineering Technology, School of Engineering Technology, Captain Elechi Amadi Polytechnic, Port Harcourt, Nigeria
Samuel Olusegun Alase, Department of Electrical/Electronic Engineering Technology, School of Engineering Technology, Captain Elechi Amadi Polytechnic, Port Harcourt, Nigeria
Follow on us
The idea here is slightly different from the general applications of contactor to electrical circuits, the said device is commonly used to make and to break electrical circuits automatically, it works for both single Phase and three Phase circuits, the difference between circuit breakers and contactors is that circuit breaker could only break automatically but cannot make until it is manually controlled, while contactors could. The technical innovation is the uncommon application of electrical contractors which are the switching off of generator when mains arrived and the ability to display indicators belonging to mains, generator and the load. Technical connectivities between the mains, generator and the load of contactor. The advantage of the connectivity is that the user will not need to get up to put off generator and to change over manually. All of that has been taken care of by the set up. The Prototype of the setup has been designed and constructed for result. Contactors are useful in commercial and industrial applications for controlling large lighting loads, for controlling motors, for fast changing over between electrical power sources and for Interconnectivity in power plants. Users of contactors will not have to move about to switch off generator and to change over power to mains when it is available, there will be no need for manual changeover device, working electrical and electronic devices would not be interrupted and one of their hallmarks is reliability. Contactor does not simply wear out from normal use. It prevents user from electric shock and there is no earthing.
Mains Make, Break, Contactor, Single Phase, Three Phase, Technical Connectivity, Prototype
To cite this article
Samuel Llewellyn Davies,
Samuel Olusegun Alase,
Technical Innovation of Contactor Applications (TICA), Advances in Networks.
Vol. 7, No. 2,
2019, pp. 37-44.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Sunil, S. R. A. O. (2008). Switchgear Protection and Power System. Khanna Publisher.
Ngeme, E. O. (1997). Basic Electric Power Systems. Trumpet Press Publishers.
Alase, S. O. (2013). Fundamentals of Electrical Machines. IS-Jac International Co.
Alan, H. R. and Wilhem, C. M. (1999). Circuit Analysis and Theory.
Budhia, M., Covic, G. and Boys, J. (2010). A new CPT magnetic coupler for electrical contactor systems. Paper presented at the IEEE 36th annual conference of industrial electronics society, 2010.
Budhia, M., Covic, G. A. and Boys, J. T. (2011). Design and optimization of circular magnetic structures for lumped inductive power transfer systems. IEEE Trans Power Electron 26: 3096–3108.
Grover, F. W. (1964). Inductance calculations. Dover, New York.
Jaegue, S., Seungyong, S., Yangsu, K., Seungyoung, A., Seokhwan, L. and Guho, J. (2014). Design and implementation of shaped magnetic-resonance-based wireless power transfer system for roadway-powered moving electric vehicles. IEEE Trans Ind Electron 61: 1179–1192.
Kainan, C. and Zhengming, Z. (2013). Analysis of the double-layer printed spiral coil for wireless power transfer. IEEE J Sel Top Power Electron 1: 114–121.
Kusaka, K. and Itoh, J. I. (2002). Proposal of switched mode matching circuit in power supply for wireless power transfer using magnetic resonance coupling.
Schuylenbergeh, K. V. and Puers, R. (2009). Inductve Powering –Basic Theory and Application to Biomedical Systems. New York. NY. USA: Springer-Verlag, 2009.
Leandros, M., Jianmin, J. A. and Last, S. M. (2015). Dynamic wireless charging of electric vehocles on the move with mobile energy disseminators in international journal of advanced computer science and applications.
Croft, T. and Summers, W. (1987). American Electricians' Handbook (Eleventh Ed.). New York: McGraw Hill. p. 7-124.
Hammond, R. (1968). Development of electric traction. Modern Methods of Railway Operation. London: Frederick Muller. pp. 71–73.
Ransome-Wallis, P. (1959). Electric motive power. Illustrated Encyclopedia of World Railway Locomotives. London: Hutchinson. p. 173.
Holm, R. (1958). Electric Contacts Handbook (3rd Ed.). Berlin / Göttingen / Heidelberg: Springer-Verlag. pp. 331–342.