Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method
Volume 4, Issue 3-1, June 2015, Pages: 1-4
Received: Feb. 16, 2015;
Accepted: Mar. 23, 2015;
Published: May 12, 2015
Views 5255 Downloads 117
Baoge Zhang, Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang, China
Jianguo Zhu, Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang, China
In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with hole-drilling method are reliable and effective for residual stress measurement.
Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method, Optics. Special Issue: Optical Techniques for Deformation, Structure and Shape Evaluation.
Vol. 4, No. 3-1,
2015, pp. 1-4.
A. S. Franchim, V.S. de Camposa, D. N. Travessa, and C.D. Moura Neto, "Analytical modelling for residual stresses produced by shot peening". MATER DESIGN, 2009. 30(5): p. 1556-1560
S.M.H Gangaraj, M. Guagliano, and G.H. Farrahi, "An approach to relate shot peening finite element simulation to the actual coverage". SURF COAT TECH, 2014. 243: p. 39-45.
T.Hong, J.Y. Ooi, and B. Shaw, "A numerical simulation to relate the shot peening parameters to the induced residual stresses". ENG FAIL ANAL, 2008. 15(8): p. 1097-1110.
P.J. Withers and H. Bhadeshia, "Overview - Residual stress part 1 - Measurement techniques". MATER SCI TECH-LOND, 2001. 17(4): p. 355-365.
B. Zuccarello and G. Di Franco, "Numerical-experimental Method for the Analysis of Residual Stresses in Cold-expanded Holes". EXP MECH, 2013. 53(4): p. 673-686.
M. Frija, T. Hassine, R. Fathallah, C. Bouraoui, and A. Dogui,"Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity". MAT SCI ENG A-STRUCT, 2006. 426(1-2): p. 173-180.
N.S. Rossini, M. Dassisti, K.Y. Benyounis, and A.G. Olabi, "Methods of measuring residual stresses in components". MATER DESIGN, 2012. 35: p. 572-588.
P.J. Withers, "Residual stress and its role in failure". REP PROG PHYS, 2007. 70(12): p. 2211-2264
H. Schmidt and J. Hattel, "A local model for the thermomechanical conditions in friction stir welding". MODEL SIMUL MATER SC, 2005. 13(1): p. 77-93.
H.M. Xie, B. Li, R. Geer, B. Xu, and J. Castracane, "Focused ion beam Moire method". OPT LASER ENG, 2003. 40(3): p. 163-177.
T. Kim, H. Lee, M. Kim, and S. Jung," A 3D FE model for evaluation of peening residual stress under angled multi-shot impacts". SURF COAT TECH, 2012. 206(19-20): p. 3981-3988
F. Yang, Z. Chen, and S.A. Meguid, "3D FE modeling of oblique shot peening using a new periodic cell". INT J MECH MATER DES, 2014. 10(2): p. 133-144