Building Inertial Electrostatic Confinement Fusion Device Aimed for a Small Neutron Source
International Journal of High Energy Physics
Volume 4, Issue 6, December 2017, Pages: 88-92
Received: Oct. 20, 2017;
Accepted: Nov. 1, 2017;
Published: Dec. 15, 2017
Views 1832 Downloads 126
Gamal M. El-Aragi, Plasma Physics and Nuclear Fusion Department, Egyptian Atomic Energy, Cairo, Egypt
The aim of this paper introduces the preliminary results of the design and construction of first Egyptian inertial electrostatic confinement IEC fusion device. It consists of 2.8 cm stainless steel cathode, 6.5 cm anode diameter with 10 cm diameter 30 cm height vacuum chamber. The operation of IEC experiments has concentrated on pulsed operation to achieve the high currents required to generate increased reactions rates. The discharge voltage waveform with peak voltage 20kV with a full width half maximum (FWHM) of 10 nanoseconds and current pulse waveform has been registered using pick-up coil with peak current about 150mA. Experiments are performed with air as operating gas at different pressures and voltages. Time resolved of x-ray radiation signals are obtained using fast radiation detector.
Gamal M. El-Aragi,
Building Inertial Electrostatic Confinement Fusion Device Aimed for a Small Neutron Source, International Journal of High Energy Physics.
Vol. 4, No. 6,
2017, pp. 88-92.
Copyright © 2017 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
blogspot.com - Will’s Amateur Science and Engineering: Fusion Reactor’s First Light!, Feb 2010 (from blog).
D. R. Boris et al., Phys. Rev. E 80, 036408 (2009).
Earnshaw S (1842) On the nature of the molecular forces which regulate the constitution of the luminiferous ether. Trans Camb Philos Soc 7: 97–112.
P. T. Farnsworth, “Electric Discharge Device for Producing Interactions Between Nuclei,” U. S. Patent #3,258,402, June 1966.
P. T. Farnsworth, “Method and Apparatus for Producing Nuclear Fusion Reactions,” U. S. Patent # 3,386,883, June 1968.
O. A. Lavrent’ev, “Investigation of an electromagnetic trap,” AEC-tr-7002, (1970).
O. A. Lavrent’ev, “Electrostatic and Electromagnetic High-Temperature Plasma Traps,” Annals N. Y. Acad. Sci., vol. 251, pp. 152, 1975.
G. H. Miley, H. Momota, “A collimator-converter system for IEC propulsion,” Space Technology and Applications International Forum-STAIF 2002, 2002, pp. 768-779.
C. C. Dietrich, “Improved Particle Confinement in Inertial Electrostatic Fusion for Spacecraft Power and Propulsion”, Ph. D. Dissertation, Massachusetts Institute of Technology, Feb. 2007.
J. H. Nadler, “Space-Charge Dynamics and Neutron Generation in an Inertial Electrostatic Confinement Device”, Ph. D. Dissertation, University of Illinois Urbana-Champaign, 1992.
B. Jurczyk, “Theory and development of a sealed Deuterium-Tritium Inertial Electrostatic Confinement Neutron Generator,” M. S. Thesis, University of Illinois Urbana-Champaign, 1997.
Brendan Sporer “A method for Active Space Charge Neutraliztion in an Inertial Electrostatic Confinement(IEC) Nuclear Fusion on Device” Ph. D. Dissertation, The Pennsylvania State University, Spring 2017.
Hull, Richard. "FAQ - Operation of a Fusor." January 2011.
S Yu Gus'kov and Yu K Kurilenkov, Neutron yield and Lawson criterion for plasma with inertial electrostatic confinement, Journal of Physics: Conference Series 774 (2016) 012132.