Personal Information
Mohan Nagaraj

Department of Industrial Engineering and Management, Dr.Ambedkar Institute of Technology, Bengaluru, Karnataka, India

Mohan Nagaraj
Educations
From 08/1990 to 10/1994, Bachelor Engineering in Mechanical Engineering, UVCE,Bangalore,India , India
From 10/1998 to 10/2000, Master of Engineering in Manufacturing Science and Engineering,UVCE,Bangalore,India , India
From 08/2008 to 10/2011, Doctor of Philosophy in Metallurgical and Materials Engineering,National Institute of Technology, Trichy,India , India
Work Experiences
From 05/2003 to 05/2019, Professor , Department of Industrial Engineering and Management,Dr.Ambedkar Institute of Technology.India
From 01/2002 to 04/2003, Senior Application Engineer , Zigna Sofware Limited, Bangalore
From 04/1998 to 12/2000, Computer Aided Design Engineer , Aeronautical Development Agency, India
From 03/1996 to 04/1998, Computer Aided Design Engineer , National Aerospace Laboratories, India
From 09/1995 to 02/1996, Quality Control Engineer , Udaya Engineering Works Private Ltd, India
Speciality
Composite Materials Testing and Manufacturing, Mechanical and Triboogy on Composite Materials, Fracture Analysis, Natural Composites
Book
Effect of Titanium carbide on the erosive wear behavior of glass-epoxy composite at elevated temperature,Mc.GrawHil ISBN-978-935-059-046-1l, Book Chapter
Journal Articles
Mohan, N., Natarajan, S., & Kumaresh Babu, S. P. (2011). Abrasive wear behaviour of hard powders filled glass fabric–epoxy hybrid composites. Materials & Design, 32(3), 1704-1709. ISSN: 0261-3069, Elsevier, Index: Scopus H Index, Q1, IF-4.56,RGJI- 5.00
Mohan, N., Natarajan, S., & Kumaresh Babu, S. P. (2010). Studies on two-body abrasive wear behavior of graphite-filled glass-fabric epoxy composites. International Journal of Material Science, 5, 974-1836. ISSN 0973-4589 Q3
Mohan, N., Natarajan, S., & KumareshBabu, S. P. (2011). Investigation on Sliding Wear Behaviour and Mechanical Properties of Jatropha Oil Cake‐Filled Glass‐Epoxy Composites. . Journal of the American Oil Chemists' Society, 88(1), 111-117. ISSN 0002-7863,Springer,Q1
Mohan, N., Natarajan, S., Kumaresh Babu, S. P., & Lee, J. H. (2010). Solid particle erosion of uhmwpe filled aramid fabric-epoxy hybrid composites. In Advanced Materials Research (Vol. 123, pp. 1051-1054). Trans Tech Publications. ISSN1662-8985, Q3
Mohan, N., Natarajan, S., & Babu, S. K. (2011). Sliding wear behavior of graphite filled glass-epoxy composites at elevated temperatures. Polymer-Plastics Technology and Engineering, 50(3), 251-259. ISSN 0360-2559, Taylor and Francis, Index: Scopus H Index, Q2, IF-1.65,RGJI-2.53
Mohan, N., Natarajan, S., & KumareshBabu, S. P. (2010). Investigation on two-body abrasive wear behavior of silicon carbide filled glass fabric-epoxy composites. Journal of Minerals and Materials Characterization and Engineering, 9(03), 231. ISSN 04 50-2899,Q2
Kumaresh Babu, S. P., Chairman, A., & Mohan, N. (2010). Investigation on Two-Body Abrasive Wear Behavior of Tungsten Carbide Filled Glass Fabric-Epoxy Hybrid Composites. In Advanced Materials Research (Vol. 123, pp. 1039-1042). Trans Tech Publications. ISSN1662-8985,Q3
Satheesh Kumar, M. N., Yaakob, Z., Mohan, N., & Kumaresh Babu, S. P. (2010). Mechanical and Abrasive Wear Studies on Biobased Jatropha Oil Cake Incorporated Glass–Epoxy Composites. Journal of the American Oil Chemists' Society, 87(8), 929-936. ISSN 0002-7863, Springer, Index: Scopus H Index Q1,IF-1.42,RGJI- 1.73 Q1
Mohan, N., Natarajan, S., & KumareshBabu, S. P. (2012). The role of synthetic and natural fillers on three‐body abrasive wear behaviour of glass fabric–epoxy hybrid composites. Journal of applied polymer science, 124(1), 484-494. ISSN 1097-4628, Wiley Index: H Index, Q1, IF-1.90,RGJI- 1.67
Mohan, N., Natarajan, S., Kumaresh Babu, S. P., Siddaramaiah, S., & Lee, J. H. (2012). Studies on erosive wear behavior of UHMWPE-filled aramid–epoxy hybrid composites. Materials and Manufacturing Processes, 27(4), 430-435. ISSN: 1532-2475 Taylor and Francis, Index: Scopus H Index, Q2, IF-2.69,, RGJI- 1.63,Q2
Mohan, N., Mahesha, C. R., & Rajaprakash, B. M. (2013). Erosive wear behaviour of WC filled glass epoxy composites. Procedia Engineering, 68, 694-702. ISSN: 1877-7058, Index: Scopus H Index, RGJI-073,
Mohan, N., Mahesha, C. R., Mathivanan, N. R., & Shivamurthy, B. (2013). Dry sliding wear behaviour of Ta/NbC filled glass-epoxy composites at elevated temperatures. Proocedia Engineering, 64, 1166-1172.ISSN: 1877-7058, RGJI-073,
Rajesh Chandra, C., Ravikumar, T. R., & CR, Mohan.N. (2013). Mechanical and Three-body abrasive wear behaviour of Nano-Flyash/ZrO2 filled Polyimide Composites. International Journal of Science Research, 1(4), 196-202. ISSN : 2277-7989 Elesvier, Q2
Mohan, N., Mahesha, C. R., Raja, Tribo-mechanical behavior of SiC filled glass-epoxy composites at elevated temperatures, International Journal of Engineering Science and Technology, 6, ( 5), 2014, 44-56 , Index: Scopus H Index , RGJI- 0.57 Q3
Rajesh.K, N. Mohan, C.R.Mahesha,(2017). Mechanical and Dry Sliding wear Behavior on FlyAsh/Graphite/Magnesium Particles Reinforced Aluminum (AL6061) Metal Matrix Composites. Vol (2), 386-397, ISSN-2321-3051
Vinay Kumar N. Mohan. (2017) Tribological Investigation of Coconut Coir/Banana fivers/Glass Fiber Reinforced Hybrid Polymer Matrix Composites. International Journal of Research in Aeronautical and Mechanical Engineering, 85 -91, ISSN-2321-3051.
C.R.Mahesha, N. Mohan, Shivarudraiah (2017) Role of Nano fillers on Mechanical and Dry sliding wear behavior of Basalt composites, Journal of Materials Today, 8192-8199. RGJI-071
C.R.Mahesha, N. Mohan, Shivarudraiah (2017), Three body abrasive wear studies on nano clay/nano Tio2 filled basalt epoxy composites, Journal of Materials Today, Vol (4), 3979-3986, RGJI-073,
Kumar, S., Nagraj, Mohan. Bongale, A., & Khedkar, N. (2018). Deep Cryogenic Treatment of AISI M2 Tool Steel and Optimisation of Its Wear Characteristics Using Taguchi‘s Approach. Arabian Journal for Science and Engineering, 1-13. Springer Index: Scopus Q2, IF-1.092,RGJI-1.04
Kumar, S., Nagaraj, Mohan. Khedkar, N. K., & Bongale, A. (2018). Influence of deep cryogenic treatment on dry sliding wear behaviour of AISI D3 die steel. Materials Research Express, 5(11), 116525. IOP, Index: Scopus Q2, IF-1.151,RGJI-0.87
SatishKumar, N.Mohan (2017) Effect of Cryogenic Treatment on Tool Steels. International Journal of Advanced Research, 1035-1045 ISSN 2320-5407, RGJI-0.22
Sachit.T.S, N.Mohan (2017) Aluminum Based Hybrid Nano Composites: A Review On Reinforcement, Mechanical And Tribological Characteristics, International Journal of Advanced Research, 167-175 ISSN 2320-5407. RGJI-0.22
Ashok Kumar R.Tawadi, N.Mohan (2017) Sliding Wear Characteristics of Fiber Reinforced Fillers Filled Polymer Based Composites: A Review, International Journal of Material Science, 133-169, ISSN 0973-4589.
SatishKumar, N.Mohan, Arunkumar Bongale, Nitin Khedkar, (2018) Effect of deep cryogenic treatment on the mechanical properties of AISI D3 tool steel, International Journal of Materials Engineering Innovation, Decision Accepted and awaiting for publication, RGI-0.71
Vinay Kumar.D, N.Mohan (2017) Wear Characteristics on Fiber Reinforced Filler filled Hybrid Polymer Matrix Composites, International Journal Of Research In Aeronautical And Mechanical Engineering, 85-92, 2321-3051
Vinay Kumar.D N.Mohan (2017) Investigation of Tribological Properties of Plasma Sprayed Ceramic Coating AISI-1020 Stainless Steel, Indian Journal of Science and Technology, 122-125, 0974-6846.
Rajesh kivade, S. Channabasavaraj ,N, Mohan , C.R. Mahesha (2017) Mechanical And Dry Sliding Wear Behaviour On Flyash/Graphite/ Magnesium Particles Reinforced Aluminum (Al6061) Metal Matrix Composites, International Journal Of Research In Aeronautical And Mechanical Engineering, 386 -398, ISSN : 2321-3051
Ashok Kumar R.Tawadi, N.Mohan (2018) Development and Investigation on Mechanical Properties of Pongamia Oil-Cake/UHMWPE filled Basalt Epoxy composites, Journal of the Materials Today: Proceedings, Elsevier 5(1) 24525-24534, ,RGI-0.71
Sachit.T.S ,N.Mohan (2018) Synthesis and mechanical characterization of aluminum-based hybrid Nano composites reinforced with nano tungsten carbide and nano tantalum niobium carbide particles International Journal of Materials Engineering Innovation, Vol. 9, No. 4, pp.279 – 290,RGI-0.14
Ashok Kumar R.Tawadi, N.Mohan, (2018) Investigation on sliding wear behaviour of UHMWPE filled basalt epoxy composites, Journal of American Institute of Physics, 2057(1).020048-1
Ashok Kumar R.Tawadi, N.Mohan, (2019) Sliding Wear role of Pongamia oil cake incorporated Basalt Epoxy Composites: A Taguchi Technique, Journal of American Oil Chemists Society, Wiley Inderscience Publication, Decision Communicated, Under Review.IF-1.6,RGIF-1.73
Ashok Kumar R.Tawadi, N.Mohan, (2019) Investigation on Tribological Behaviour of Bio Based Pongamia Pinnata Seed Cake Waste Incorporated Basalt Epoxy Composites. Journal of the Materials Today: Proceedings, Elsevier, Accepted and Awaiting for Publication.
Sachit.T.S ,N.Mohan (2019) Wear rate optimization of Tungsten carbide (WC) nano particles reinforced Aluminum LM4 alloy composites using Taguchi technique, Journal of Materials Research Express, V-6,No-6, PP-257-266, IF-1.15,RGIF-0.87,
Sachit.T.S ,N.Mohan (2019) Wear Behavior of Aluminum LM4 Reinforced with WC and Ta/NbC Hybrid Nano-Composites Fabricated Through Powder Metallurgy Technique, FME Transactions 47, 534-542.
Conference Papers
N.Mohan, B.Suresha,G., Chandramohan, P.Samapthkumaran, S.Seetharamu,Evaluation of Mechanical Properties of Glass – Epoxy and SIC particles Filled Glass-Epoxy Composites., International Conference on Material Processing Methods (ICMPM -2005) Bannariamman Institute of Technology, Sathyamangalm Tamilnadu,
N.Mohan, B.Suresha, G.Chandramohan.,Effect of Filler addition on the Abrasive Wear of Glass Reinforced Epoxy Composites., National Conference on Recent Advance in Manufacturing Technology (RAMT 2006) Velammal College of Engineering, Chennai, Tamilnadu.
N.Mohan, B.Suresha, G.Chandramohan.,Friction and dry slide wear behaviour of short glass fiber reinforced polymeric composites.,NMD-ATM-2006, Jamshedpur
N.Mohan, S.Natarajan, S.P.KumareshBabu., Tribological Behaviour of graphite filler filled glass fabric epoxy composites at elevated temperature ” Internationa Confernce on TEAM TEACH-2009, Bangalore, India,
N.Mohan, S.Natarajan, S.P.KumareshBabu., Abrasive wear behavior of tantalum niobium carbide filler filled glass fabric reinforced- epoxy composites. Second International Conference on Polymer Processing and Characterization”, Kottayam, Kerala, India, ICPC-2010
N.Mohan, S.Natarajan, S.P.KumareshBabu., Influence of Jathropha press cake filler in glass fabric-epoxy composites on sliding wear behaviour ” International conference on recent trends in Materials & Characterization -NIT, Surathkal,Karnataka ICRTMC-2010
Mohan, S.Natarajan, S.P.KumareshBabu.,Solid Particle erosion of UHMWPE filled Aramid Fabric Epoxy Hybrid Composites” International Conference on Multifunctional Materials and Structures (MFMS-2010) South Korea
Mohan, S.Natarajan, S.P.KumareshBabu., Investigation on Two-body abrasive wear behavior of Tantalum Niobium Filled Glass-Epoxy Composites Composites.,International Conference on Recent Trends in Materials Science & Technology, 2010 Tiruvananthapuram Kerala
Mohan, S.Natarajan, S.P.KumareshBabu, Sliding wear beahviour of tungsten carbide filled glass-epoxy composites at elevated temperatures, International Symposium for Research Scholar on Metallurgy, Materials Science & Engineering (ISRS-2010),IIT Chennai.
Mohan, S.Natarajan, S.P.KumareshBabu.,Dry-Sliding wear behaviour of SiC filled Glass Fabric Reinforced Epoxy Composite Material at Elevated Temperatures” International Conference on Nano-Composites, (2010) Kottayam, Kerala
Mohan, S.Natarajan, S.P.KumareshBabu,Effect of Jatropha oil Cake on Erosive Wear of E-Glass Fabric Reinforced Epoxy Composite Materials, International Conference on Nano-Composites, (2010) Kottayam,Kerala
Mohan, S.Natarajan, S.P.KumareshBabu , Abrasive wear behavior of tungsten carbide feller filled glass fabric reinforced-epoxy composites,(2009)_National Conference on Recent Advanced in Composite Materials, KVG Sullya Dashin Kannada. Karnataka
Mohan, S.Natarajan, S.P.KumareshBabu. Influence of Jatropha press cake filler filled glass fabric reinforced –epoxy composites on abrasive wear behavior” National Conference on Composites Materials, INCCOM-8.Tiruvantantapuram Kerala
Mohan, S.Natarajan, S.P.KumareshBabu “Two-body abrasive wear behaviour of UHMWPE filled aramid epoxy composites” POLYCON-2011, 5th National conference on Plastics and Rubber Technology,SJCE,Mysore
Mohan, S.Natarajan, S.P.KumareshBabu, Dry sliding wear bheaviour of Ta/NBc filled glass-epoxy composites at elevated temperatures(2013) International Confernce on Design and Manufacturing. Kanchipiuram, TamilNadu.
Mohan, S.Natarajan, S.P.KumareshBabu, C.R.Mahesha,“Erosive wear behavior of WC filled glass epoxy composites” Malaysian International Tribology Conference, (2013) Kotakinabalu, Sahba, Malaysia,
C.R.Mahesha, N. Mohan, Shivarudraiah ,Role of Nano fillers on Mechanical and Dry sliding wear behavior of Basalt composites, 5th International Conference of Materials Processing and Characterization (ICMPC 2016),Hydrabad
Rajesh.K., Mohan, S., C.R.Mahesha “Mechanical and Dry sliding wear behavior of Flyash – Graphite-Magnesium Particles reinforced aluminum metal Matrix composites” Int. Conf. on Emerging Trends in Mechanical Engineering Emerging Trends in Mechanical Engineering (2017) Mandya, Karnataka
Vinay.D., N.Mohan, Wear Characteristics on Fiber Reinforced Filler filled Hybrid Polymer Matrix Composites” Int. Conf. on Emerging Trends in Mechanical Engineering Emerging Trends in Mechanical Engineering (2017) Mandya, Karnataka
Ashok Kumar R.Tawadi, N.Mohan Investigation on Mechanical Properties of Pongamia Oil Cake/UHMWPE filled Basalt Epoxy composites, International Conference on Advanced Materials Manufacturing and Applications. (2017) Bangalore, Karnataka.
N.Mohan, Ashok Kumar R.Tawadi, Effect of UHMWPE filler on Dry-Sliding Wear Behavior of Aramid Fabric-Reinforced Epoxy Composite, National Conference organized by ICCP at (2018) NITK Surathkal.
Ashok Kumar R.Tawadi, N.Mohan, Development and Investigation on Mechanical Properties of Pongamia Oil-Cake/UHMWPE filled Basalt Epoxy composites, International Conference on Advanced Manufacturieng Materials and Applications, (AMMA-2018), AITS, and Bangalore.
Ashok Kumar R.Tawadi, N.Mohan, (2019) Investigation on Tribological Behaviour of Bio Based Pongamia Pinnata Seed Cake Waste Incorporated Basalt Epoxy Composites. ICMPC-2019,Hydrabad,India
Honors and Awards
The paper titled “Friction and dry slide wear behaviour of short glass fiber reinforced polymeric composites” presented at NMD-ATM 2006, Jamshedpur, was adjudged as best technical paper and awarded a prize.
The paper titled “Dry sliding wear behaviour of graphite filler filled glass-epoxy composites at elevated temperatures” presented at Int. Conference on Total Engineering Analysis and Manufacturing Technology, TEAM-TECH-2009, Bangalore, was adjudged as best technical paper and awarded a prize.
Invited Talks
Faculty Development Program on Composite Mechanics, Processing and Characterization,on April-2013,PESIT Bangalore,India
TTMT National Conference on January-2017,SJBIT,Bangalore,India
POLYCON2017 National Conference September 2017 Mysore SJCE , India
ETME-2017 International Conference December-2017 Mandya CIT, India
World Class New Manufacturing National January-2018 The Oxford College of Engineering , AICTE-FDP,Bangalore,India
Advanced Manufacturing Process and Testing National September 2018, Vivekananda College of Engineering and Technology,Puttur DK, India
Tribological Characteristics on Polymer Matrix Composites. National Seminar on February 2019, Government College of Engineering ,Thanjavur, India
Recent Trends on Advanced Manufacturing Process and its Applications. National Seminar on April 2019 , Vivekananda College of Engineering and Technology,Puttur DK,India
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186