Personal Information
Santosh Shelke

Department of Mechanical Engineering, R.H.Sapat College of Engineering, Management Studies and Research, Pune university, Nasik, Maharastra State, India

Santosh Shelke
Educations
From 2008 to 2013, PhD(Mech) , India
From 2002 to 2004, Master in Mechanical engg , India
From 1995 to 1999, Bachlor in Mechanical Engg , India
Work Experiences
From 2000 to 2005, Lecturer in Mechanical Engg department , SVIT Nasik,Pune university
From 2006 to 2012, Assistant Professor & Haed,Mechanical Engg , SVIT Nasik,pune University
From 2013 to 2015, Associate Professor,Head &Vice Principal(Academic) , SVIT Nasik,Pune university
From 2015 to 2016, Associate professor and Head(PG) , R.H.Sapat COE Nasik,Pune university
Projects
From 2006 to 2008, Mechanical Engineering , Funding Research project completed on Design and Analysis of solar Tracking system
Speciality
Design Engg & optimisation,vibration,stress analysis,Tribology
Book
Santosh Shelke, Dr.Venkatachalam, Optimum power loss in electromagnetic bearing, published in IEEE explore, ISBN: 978-3Vol.3, Dec.2011, pp.374-379. (Citations:6)
Journal Articles
Santosh Shelke, Dr.Venkatachalam, Optimum power loss in electromagnetic bearing, published in IEEE explore, ISBN: 978-3Vol.3, Dec.2011, pp.374-379. (Citations:6)
Santosh Shelke, Dr.Venkatachalam, Optimum Power loss analysis of Radial Magnetic bearing: Multi-objective Genetic Algorithm, published in Springer digital library, Verlinberg (e-ISSN 1865-0937), pp.59-63. (Citations:1)
Santosh Shelke, Dr.Venkatachalam, Optimum Power Loss Analysis of Radial Magnetic bearing using Genetic Algorithm, International Journal of Computer Applications, USA (ISSN: 0975–8887), Vol.27, No.6,August 2011,pp.20-27. (Impact factor 0.85). (Citations:3)
Santosh Shelke, Dr.Venkatachalam, Optimization of total power Loss in Eight poles Radial Magnetic Bearing, International Journal of Advances in Engineering & Technology (ISSN: 2231-1963), Vol.1, issue 4, Sept 2011, pp.249-261. (Impact factor 2.35)
Santosh Shelke, Dr. Venkatachalam, Optimum loss in eight pole Radial Magnetic Bearing, IJMAE, SERC, USA,2012 (ISSN: 0974-231X),Vol.22 (6),2011, pp.20-27
Santosh Shelke, Dr.Venkatachalam, R., Total loss optimization in varying pole pair radial magnetic bearing using theoretical and genetic algorithm approach, International journal of Engineering Technologies in Computational and Applies Sciences, USA, Vol.1(3),2013,pp. 87-93 (Impact factor 1.23)
Santosh Shelke, Rakesh Nagabhushgana, Contact fatigue estimation and material optimization for wear of cam shaft for high pressure diesel pumps, International journal of Engineering research and Industrial applications(IJERIA),ISSN 0974-1518,Vol.6 (2),2013,pp.191-201.
Firoz Pathan, Dr. Santosh Shelke, Design of cold rolling mill components, International Journal of Innovative Technology and Exploring Engineering, ISSN 2278, Vol.03(10), 2014,pp.9-13. (Impact Factor 1.27)
Firoz Pathan, Dr. Santosh Shelke, Structural Analysis of work roll chock and backup roll chock in cold rolling mill, International Journal of Engineering Research and Science and Technology, ISSN 2321-7758, Vol.2(1), 2014,pp.47-56.
Nitin Ahire, Vijay Kadlag, Santosh Shelke, Vibration Analysis of distributor using multiphase flow analysis, IOSR Journal of Mechanical and Civil Engineering, USA e-ISSN 2278-1684, p-ISSN:2320-334X,2014, pp.29-31. (Impact Factor 1.485)
Manoj Sonawane and Dr. Santosh N. Shelke, Stress Analysis of Bolts used to connect two plates in circular array pattern for various loads, International journal of current Engineering and Technology, USA,ISSN 2277-4106,Vol.4(4), 2014, pp.1-5.(Impact Factor 2.55)
Chumble and Dr. Shelke, Study of effect of adhesive layer thickness on strength of single lap joint by using Ansys and Mechanical testing, International journal of Innovations in Engineering Research,ISSN:2348-4918,Vol.1(4),2014,pp.1-5.
Ahire and Shelke, Study and Analysis of Distributor system by Analytical and Experimental methods, International journal of Innovations in Engineering Research,ISSN:2348-4918,Vol.1(4),2014,pp.1-6.
Khairnar and Dr. Shelke, Design development, testing and analysis of torque limiter for overload protection, International journal of Innovations in Engineering Research,ISSN:2348-4918,Vol.1(5),2014,pp.1-5.
Chumble and Dr. Shelke, Stress-strain effects of adhesive layer thickness on Single lap joint by using Ansys, International Journal for Research in Technological Studies, Vol. 1( 8), 2014, ISSN (online): 2348-1439,pp.1-6.
Mayuri Mhaske, Dr.Shelke, Detection of depth and location of crack in beam by using Vibration Measurement, ANN and GA, International Engineering research Journal, Special Issue(2), 2015,pp.488-493.
Dr. Santosh Shelke, Total loss optimization in varying pole pair radial magnetic bearing using theoretical and genetic algorithm approach, Journal of Engineering Tribology, Institute of Mechanical Engineers,Sage, UK, Vol.230(6),2016,pp.621-633.(Impact factor 1). (Citations:1)
Dr. Santosh Shelke, Controllability of Radial magnetic Bearing, Procedia Technology, Elsevier, Vo.(23),2016,pp.106-113.
Conference Papers
Power losses in Radial Magnetic Bearing, published in international conference proceeding, N.I.T. Surat, 2009.
Optimum power loss in eight poles Radial Magnetic Bearing, published in International conference proceeding, Government college of Engineering, Aurangabad, 2010.
Optimum power loss in Electromagnetic Bearing, proceeding of International conference on Electronic Computer Technology,(icect 11),organized by IEEE, at Kanyakumari, Vol.3 (374), ISBN: 978-3, 2011.
Optimum Power Loss Analysis of Radial Magnetic bearing: Multi-objective Genetic Algorithm, proceeding of second International conference on control communication and power Engineering (ccpe2011), Pune, organized by ACEEE, Springer, Verlinberg (ISSN 1865-0929), 2011, pp.59-63.
Contact fatigue estimation and material optimization for wear of cam shaft for high pressure diesel pumps, International conference on Recent Trends in Engineering and Technology, organized by SNJB COE, Nashik, 2013.
Determination of effect of adhesive layer thickness on joint strength, 2nd International conference on Recent Trends in Engineering Sciences, organized by Elsveir, India, Nashik, 2014.
Design optimization of work roll and backup roll chock, 4th International conference on Computational Intelligence, organized by SIT, Nashik, 2015.
Controllability of Radial magnetic Bearing, 3rd International conference on Innovations in Automation and Mechatronics Engineering, Organised by G.H.Patel COE, Gujrath, 2016,pp.20.
Modal Analysis of Cracked beam using Ansys, National conference on Advances in design, organized by G. H. Raisoni COE, A. Nagar during Feb 2016.
Worked as reviewer for Post Graduate conference of Mechanical and computer engineering,cPGCON 2015,13-14th March 2015.
Presented paper in National Conference “Recent trends in Mechanical Engineering” organized by MET, Nasik held during 21-22 March 2013.
Presented paper in National Conference “Recent trends in Mechanical Engineering” organized by MET, Nasik held during 4-6 March 2010.
Presented paper in National Conference “Trendz in Mechanical Engineering” organized by A.G. Awate college of Engineering, Pune held during March 5-7, 2010
Presented paper in Regional Research Conference for University and College Teachers “Innovation 2009” held at College of Engg. Sangamner on 11-12 Dec.2009
Presented paper in National Conference “AES for Rural Development” organized by P.G.M. College of Engg. Wagholi, Pune on 31/1/2009
Presented paper in Regional conference for Pune University College Teachers “Innovation 2009” held at SRES, college of Engg. Kopargaon on 24-25 Nov.2008
Presented paper in National Conference on “Computer Application In Manufacturing” organized by Sinhgad Institute of Tech. Lonavala on 13 & 14 March 2008.
Presented paper in National Conference on “Innovation in Mech. Engg.” Organized by J.T. Mahajan college of Engg, Faizpur on 29-30 March 2007.
National Conference on “Education in Values & Spirituality” organized by Rajasthan Gov. at Mount Abu on 4th-8th June 2006.
Honors and Awards
Best paper presentation award for paper Optimum power loss in eight poles Radial Magnetic Bearing, published in International conference proceeding, Government college of Engineering, Aurangabad, 2010.
Invited Talks
NA
ADDRESS
Science Publishing Group
548 FASHION AVENUE
NEW YORK, NY 10018
U.S.A.
Tel: (001)347-688-8931