Personal Information
M. Khalid Hossain

Bangladesh Atomic Energy Commission, Ashulia, Dhaka, Bangladesh

M. Khalid Hossain
Educations
From 2005 to 2009, B.Sc in Applied Physics, Electronics and Communication Engineering , Bangladesh
From 2009 to 2011, M.Sc in Applied Physics, Electronics and Communication Engineering , Bangladesh
Work Experiences
From 2017 , Senior Scientific Officer (Senior Research Scientist) , Bangladesh Atomic Energy Commission
From 2012 to 2017, Scientific Officer (Research Scientist) , Bangladesh Atomic Energy Commission
From 2017 , Reviewer , Journal of Physics and Chemistry of Solids
From 2018 , Reviewer , Materials Chemistry and Physics
From 2015 , Reviewer , Journal of Materials Sciences and Applications
From 2015 , Reviewer , Journal of Materials Science and Chemical Engineering
Projects
From 2017 to 2018, Development of Remote Control Electronic Device for Measuring and Visual Monitoring of Radiation Doses for high Radioactiove gamma Source , Position: Associate Investigator, Funded By: Ministry of Science and Technology, Bangladesh
From 2013 to 2014, FPGA Based Intelligent Nuclear Pulse Generator , Position: Associate Investigator, Funded By: Ministry of Science and Technology, Bangladesh
Speciality
Materials Science
Magnetic Materials
Composite Materials
Alloy Materials
Nanomaterials
Biomaterials
Micro/Nanofabrication
Applied Physics
Solar Cell
Solar Energy Materials
Functional Materials
Nuclear Materials
Nanotechnology
Condensed Matter Physics
Journal Articles
Effect of Back Reflectors on Photon Absorption in Thin-Film Amorphous Silicon Solar Cells, Applied Nanoscience, 7(7) (2017) 489–497. DOI: 10.1007/s13204-017-0582-y
Simulation, Fabrication and Analysis of Silver Based Ascending Sinusoidal Microchannel (ASMC) for Implant of Varicose Veins, Micromachins, 2017, 8(9), 278. DOI: 10.3390/mi8090278
Effect of Dye Extracting Solvents and Sensitization Time on Photovoltaic Performance of Natural Dye Sensitized Solar Cells, Results in Physics 7 (2017) 1516–1523. DOI: 10.1016/j.rinp.2017.04.011
Modeling of Self-Assembled Monolayers (SAMs) of Octadecanethiol and Hexadecanethiol on gold (Au) and silver (Ag), Results in Physics, 7 (2017) 2289-2295. DOI: 10.1016/j.rinp.2017.06.055
Influence of Mg content on tailoring optical bandgap of Mg-doped ZnO thin film prepared by sol-gel method, Results in Physics, 7 (2017) 2289-2295. DOI: 10.1016/j.rinp.2017.07.047
Efficient amorphous silicon solar cells: characterization, optimization, and optical loss analysis, Results in Physics, 7C (2017) 4287-4293. DOI: 10.1016/j.rinp.2017.09.030
nnealing Temperature Effect on Structural, Morphological and Optical Parameters of Mesoporous TiO2 Film Photoanode for Dye-Sensitized Solar Cell Application, Materials Science-Poland, 2017. DOI: 10.1515/msp-2017-0082
Efficiency Enhancement of Natural Dye Sensitized Solar Cell by Optimizing Electrode Fabrication Parameters, Materials Science-Poland, 2017. DOI: 10.1515/msp-2017-0086
Influence of Natural Dye Adsorption into TiO2 Based DSSC's Photoanode on Structural, Morphological and Optical Properties, Materials Science-Poland, 2017. (Accepted)
Preparation and spectroscopic analysis of zinc oxide nanorod thin films of different thicknesses, Materials Science-Poland, 35(3), 2017, pp. 501-510. DOI: 10.1515/msp-2017-0066
Time and pressure dependent deformation of microcontact printed channels fabricated using self-assembled monolayers of alkanethiol on gold, Journal of Science: Advanced Materials and Devices, 2(3) (2017) 385-391. DOI: 10.1016/j.jsamd.2017.07.008
Development of Nanostructure Formation of Fe73.5Cu1Nb3Si13.5B9 Alloy from Amorphous State on Heat Treatment", World Journal of Nano Science and Engineering, 5 (2015) 107-114. DOI: 10.4236/wjnse.2015.54013
Study and Characterization of Soft Magnetic Properties of Fe73.5Cu1Nb3Si13.5B9 Magnetic Ribbon Prepared by Rapid Quenching Method," Materials Sciences and Applications, 6 (2015) 1089-1099. DOI: 10.4236/msa.2015.612108
Design and Development of a Low-cost Microcontroller Based Liquid Crystal Display (LCD) System for Electronic Instrumentation, Journal of Bangladesh Electronics Society, 15 (2015) 33-38
Effect of thickness variation on structural and morphological properties of ZnO thin films prepared by sol-gel method, Journal of the Bangladesh Electronics Society, 16 (2016) 33-39
Performance Analysis of Silicon Solar Cells with Alternative Back Surface Field (BSF) Deposited by Thermal Evaporation Method, Advances in Energy and Power, 5(3) (2017) 27-31
Synthesis and Characterization of ZnS Nanoparticles Prepared by Co-Precipitation Method, Bangladesh Journal of Physics, 19 (2016) 57-66
Performance Evaluation of a DS-CDMA System in a Rayleigh Fading Environment, World Journal of Engineering and Technology, 4 (2016) 1-9. DOI: 10.4236/wjet.2016.41001
Medical Image Enhancement Using Morphological Transformation, Journal of Data Analysis and Information Processing, 4 (2016) 1-12. DOI: 10.4236/jdaip.2016.41001
Bandwidth Enhancement of A Transmission Line Feed Single Layer Dielectric Substrate Microstrip Patch Antenna, Journal of Multidisciplinary Engineering Science and Technology (JMEST), 3 (2016) 4535-4539
A Linearly Polarized Coaxial Feeding Dual Band Circular Microstrip Patche Antenna for WLAN Applications, International Journal of Wireless and Microwave Technologies (IJWMT), 6(3) (2016) 50-60. DOI: 10.5815/ijwmt.2016.03.06
Performance Analysis between Analog OFDM & Digital OFDM System, International Journal of Wireless and Microwave Technologies (IJWMT), 6(4) (2016) 84-100. DOI: 10.5815/ijwmt.2016.04.08
A Rectangular Microstrip Patch Antenna for Wireless Communications Operates in Dual Band, International Journal of Wireless and Microwave Technologies (IJWMT), 6(5) (2016) 35-44. DOI: 10.5815/ijwmt.2016.05.04
Construction and Development of an Automated Greenhouse System Using Arduino Uno, International Journal of Information Engineering and Electronic Business (IJIEEB), 9(3) (2017) 35-44. DOI: 10.5815/ijieeb.2017.03.01
Design and Development of a Versatile and Intelligent Home Security System, International Journal of Engineering and Manufacturing (IJEM), 7(4) (2017) 60-72. DOI: 10.5815/ijem.2017.04.06
Smartphone Controlled Spy Robot with Video Transmission and Object Collector, International Journal of Engineering and Manufacturing (IJEM), 7(6) (2017) 50-58. DOI: 10.5815/ijem.2017.06.05
The Coexistence and Interference Evaluation of Bluetooth with IEEE 802.11 Networks, Journal of Bangladesh Electronics Society, ISSN : 1816-1510, 15 (2015) 83-87
Design and Development of a Low Cost Intelligent Home Appliances Automation System, Journal of Bangladesh Electronics Society, ISSN : 1816-1510, 15 (2015) 67-76.
Design of a Microcontroller Based Electromagnetic Crane for Small Scale Applications, Journal of Bangladesh Electronics Society, ISSN : 1816-1510, 15 (2015) 57-60
Design and Development of an Intelligent Obstacle Finder and Remover Vehicle on Predefined Street, Journal of Bangladesh Electronics Society, ISSN : 1816-1510, 15 (2015) 47-56
Preparation of Si Wafer for Fabrication of Integrated circuit Using Chemical Mechanical Polishing (CMP) Process by Lapping Machine and Characterization of the Wafer using Surface Profilometer, AERE Internal Report, Report No. IE-43/RMD-5, Institute of Electronics, Atomic Energy Research Establishment (AERE), October 2013
Reinstallation of RIE (Reactive Ion Etcher) and Creating Plasma to Etch Semiconductor Materials Used in VLSI Technology, AERE Internal Report, Report No. IE-41/RMD-4, Institute of Electronics, Atomic Energy Research Establishment (AERE), October 2013
Construction of A Low Cost AVR-USBasp Programmer for AVR Microcontroller Series, Internal Report: IE-57/GED-21, 2017, Institute of Electronics, Atomic Energy Research Establishment, Savar, Dhaka, Bangladesh
Study on the Application of FPGA Based Frequency Counter Using VHDL Program with Nexus Board, AERE Internal Report, Report No. IE-42/VLSI-1, Institute of Electronics, Atomic Energy Research Establishment (AERE), October 2013
Software Implementation of UART Transmitter Using General Purpose I/O Pin for Sensor Node, AERE Internal Report, Report No. IE-55/GED-20, Institute of Electronics, Atomic Energy Research Establishment, November 2016
Conference Papers
Fluidic Simulations and Analysis of Three Different Nano Sized Microchannels for Biomedical Applications, 7th IEEE Int. Conf. 3M-NANO, 7-11 August 2017, Shanghai, China
Structural, Morphological, and Optical Properties of CuO thin films treated by Gamma ray", 7th IEEE International Conference on Computer, Communication, Chemical, Material and Electronic Engineering (IC4ME2-2018), February 8-9, 2018, RU, Rajshahi, Bangladesh. (Accepted)
I-Ranger: A Voice Controlled Environment Inspection Roverbot with Live Video Streaming and Mechanical Gripper, 2nd IEEE Int. Conf. ICEEE, 27-29 December, 2017, RUET, Rajshahi, Bangladesh
Influence of Mn-Substitution on the Magnetic Properties of Mg-Cu-Zn Ferrites, Int. Conf. IC4ME2-2017, Paper ID: 13, January 26-27, 2017, University of Rajshahi, Rajshahi 6205, Bangladesh
Structural Characterization and Magnetic Properties of Zn-Substituted Mg-Zn Ferrites, Int. Conf. IC4ME2-2017, Paper ID: 3, January 26-27, 2017, University of Rajshahi, Rajshahi 6205, Bangladesh
Review on TCO and Flexible Plastic based Transparent Low Resistive Conducting Substrate for Dye Sensitized Solar Cell (DSSC) Applications, Int. Conf. on Physics-2016, 10-12 March, 2016, Dhaka, Bangladesh
Design of a Linearly Polarized Multi-band Transmission Line Feed Microstrip Patch Antenna for Wireless Communications, Int. Conf. IC4ME2-2016, pp.55-58, 2016, University of Rajshahi, Rajshahi 6205, Bangladesh
Structural, Morphological and Optical Studies of ZnO Thin Film in Nano Rod Structure by Sol-Gel Technique, International Conference on Physics-2016, 10-12 March, 2016, Dhaka, Bangladesh
Development of Nanostructure Formation and Soft Magnetic Properties from Amorphous Fe73.5Cu1Nb3Si13.5B9 Magnetic Ribbon on Heat Treatment, National Conference on Physics for Technology Development, 27-28 December, 2012, Dhaka, Bangladesh
Optimization of Electrode Fabrication Parameters to Enhance the Efficiency of Natural Dye Sensitized Solar Cell, National Conference on Electronics and ICT, Paper ID: NC06, Pages: 27-28, 20 April, 2017, Bangladesh Electronics Society, Dhaka, Bangladesh
Natural Sensitizer Based Dye Sensitized Solar Cell: Optimization of Dye Extraction Parameters for Enhancement of Cell Efficiency, National Conference on Physics-2017, Paper ID: RE-03 (Pages: 96-97), 5-7 January, 2017, Bangladesh Physical Society, Dhaka, Bangladesh
Effect of annealing temperature on morphological, structural and optical properties of TiO2 based dye-sensitized solar cell photoanode, Int. Conf. on Nanotechnology and Condensed Matter Physics 2018 (ICNCMP 2018), January 11–12, 2018, BUET, Dhaka, Bangladesh
Honors and Awards
Bangabandhu Sheikh Mujibur Rahman Hall Gold Medal from Islamic University for B.Sc. (Hons) result
Islamic University Merit Scholarship, during the B.Sc. (Hons’) studies
Islamic University Merit Scholarship, during the M.Sc studies
Receive an award from nTV (one of Bangladeshi television) for outstanding academic and research background
Certificate of Nomination for Best Student Paper Award, 3M-Nano Society, China
ADDRESS
Science Publishing Group
548 FASHION AVENUE
NEW YORK, NY 10018
U.S.A.
Tel: (001)347-688-8931