Personal Information
Hamed Rashtchi

Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran

Hamed Rashtchi
Educations
From 2014 to 2015, PhD. sabbatical period (Researcher) in PEM fuel cell bipolar plates, PEM fuel cell degradation studies and PEMFC water management issues as researcher , in PEM fuel cell division, Applied Electrochemistry, School of Chemical Science and Engineering, KTH -Royal Institute of Technology Teknikringen 42, SE-10044 Stockholm, Sweden
From 2011 to 2017, PhD. in corrosion & electrochemistry, Materials Sciences Engineering , Materials Sciences Engineering Department, Isfahan University of Technology, Iran.
From 2008 to 2010, M.Sc. in ceramics, Materials Science and Engineering , Materials Science and Engineering Department, Sharif University of Technology, Teheran, Iran
Work Experiences
From 2012 to 2017, Chief Executive Officer , Seal Tech Co., Isfahan Science & Technology Town, Isfahan, Iran.
From 2012 to 2017, Lecturer , Entekhab university of applied science and technology, Isfahan, Iran.
From 2011 to 2017, Lecturer , Iran Nanotechnology Initiative Council, Tehran, Iran
Speciality
Proton Exchange Membrane Fuel Cell (PEMFC)
Solid Oxide Fuel Cell (SOFC)
Surface engineering
Coating (Sol-gel, Electroplating, Thermal spray)
Corrosion science
Surface electrochemistry
Ceramics science
Journal Articles
• Effect of Sr and Ca dopants on oxidation and electrical properties of lanthanum chromite-coated AISI 430 stainless steel for solid oxide fuel cell interconnect application, Ceramics International, Volume 39, Issue 7, September 2013, Pages 8123-8131.
• Fabrication and high-temperature corrosion of sol–gel Mn/Co oxide spinel coating on AISI 430, Surface and Coatings Technology, Volume 223, May 2013, Pages 110-114.
• Evaluation of Ni-Mo and Ni-Mo-P Electroplated Coatings on Stainless Steel for PEM Fuel Cells Bipolar Plates, Fuel Cells, Volume 16, Issue 6, October 2016, Pages 784–800
• Electroplating of Ni-Mo coating on stainless steel for proton exchange membrane fuel cell bipolar plate application, Journal of Advanced Materials in Engineering.
• Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy, Journal of Advanced Materials in Engineering, Volume 35, 2016, Pages 71-81.
• Dependence of corrosion properties of AISI 304L stainless steel on the austenite grain size, International Journal of Materials Research, Volume 108, June 2017, Pages 1-8.
• The study of Ni-based nano-crystalline and amorphous alloy coatings on AISI 304 stainless steel for PEM fuel cell bipolar plate application, International Journal of Hydrogen Energy, Volume 42, Issue 20, May 2017, Pages 14264-14278.
• Performance of a PEM Fuel Cell Using Electroplated Ni–Mo and Ni–Mo–P Stainless Steel Bipolar Plates, Journal of The Electrochemical Society, Volume 164, Issue 13, Jan 2017, Pages F1427-F1436.
Conference Papers
• Lanthanum chromite coating on stainless steel by sol–gel dip coating technique., The 5th International Conference on Surface, Coatings and Nanostructured Materials (NANOSMAT-5), Reims, France, 2010.
• Evaluation the effect of Ca and Sr dopants on properties of synthesized Lanthanum chromite coating and powder for use in Solid Oxide Fuel Cells., The 4th Fuel Cell Conference, Tehran, Iran, 2010.
• Electroplated Ni-Mo and Ni-Mo-P Coatings on Stainless Steel BPP for PEM Fuel Cells, 6th HFC Nordic conference at Högbo Bruk in Sandviken, Sweden, 26-27th of October 2016.
• Study of electroplated Ni-Mo and Ni-Mo-P coated stainless steel as bipolar plates in PEM fuel cell, 20th Topical Meeting of the International Society of Electrochemistry, Advances in Lithium and Hydrogen Electrochemical Systems for Energy Conversion and Storage, Buenos Aires, Argentina, 2017.
• Enhanced electrical properties and fuel cell performance of 316L stainless steel bipolar plate coated with amorphous Ni–Mo–P layer, The 9th Fuel Cell Conference, Tehran, Iran, 2017.
• Effect of plating current density on corrosion resistance and surface properties of Ni–Mo–P layer electroplated on 316L stainless steel, The 17th Iranian national seminar on surface engineering, Isfahan, Iran, 2017.
• Electrochemical characterization of electroplated Ni-Mo and Ni-Mo-P alloy coated stainless steel bipolar plates for PEMFC, 13th Annual Electrochemistry Seminar of Iran, Tehran, Iran, 2017.
Honors and Awards
• The best article in poster section in 9th Fuel Cell Conference, Tehran, Iran, 2017.
The best article in oral section in 13th Annual Electrochemistry Seminar of Iran, Tehran, Iran, 2017.
ADDRESS
Science Publishing Group
548 FASHION AVENUE
NEW YORK, NY 10018
U.S.A.
Tel: (001)347-688-8931