Personal Information
Shibulal Gopi Sathi

Department of Polymer Nano-Science and Technology, Chonbuk National University, Jeonju, Baekje-Daero, South Korea

Shibulal Gopi Sathi
From 08/2009 to 08/2014, PhD , Rubber Technology Centre, IIT Kharagpur, India
From 06/2007 to 05/2009, M.Tech Polymer Technology , Cochin University of Science and Technology, India
Work Experiences
From 12/2014 to present, Postdoctoral Researcher , Chonbuk National University, South Korea
From July 2008 to April 2009, M.Tech. Internship, VSSC, India, Development of a low compression set N2O4 and UH 25 compatible bromobutyl rubber based O-ring , A novel crosslinking approach for the bromobutyl rubber with 4, 4’-bis (maleimido) diphenylmethane and zinc oxide has been employed to achieve the target
Rubber Science and Technology
Compounding and Vulcanization by R. Rajesh Babu, G.S. Shibulal, Arup K. Chandra, KinsukNaskar Book Chapter in Advances in Elastomers I (2013)-Advanced Structured Materials Volume 11, pp 83-135 (2013)
Journal Articles
'RFL coated aramid short fiber reinforced thermoplastic elastomer: Mechanical,rheological and morphological characteristics', Journal of Polymer Research, Springer, ISSN: 1572-8935, 18, 2011, 2295-2306, G.S. Shibulal, K.Naskar
'Cure characteristics and physico-mechanical properties of a conventional sulphur-cured natural rubber with a novel anti-reversion agent', Journal of Polymer Research, Springer, ISSN: 1572-8935, 23, 2016, 237-245, G.S. Shibulal, Jun Yeol Jung, Kwang-Un Jeong and Changwoon Nah
'Scrutinizing the influence of strain induced fiber orientation on the melt rheological behavior of short aramid fiber/thermoplastic elastomer composite uses Rubber Process Analyzer', Journal of Applied Polymer Science, WILEY-BLACKWELL, ISSN: 1097-4628, 128, 2013, 4151-4163. G.S.Shibulal, K.Naskar
'Maleic anhydride grafted polybutadiene as a controlled defibrillating and dispersing agent for short aramid fiber reinforced thermoplastic polyurethane composite with improved mechanical properties', Journal of Applied Polymer Science, WILEY-BLACKWELL, ISSN: 1097-4628, 130,2013, 2205-2216.G.S. Shibulal, K.Naskar
'Thermally stable bromobutyl rubber with high crosslinking density based on the 4,4' bis(maleimido)diphenyl methane curing agent', Journal of Applied Polymer Science, WILEY-BLACKWELL, ISSN: 1097-4628, ,133, 2016, 44082, G.S. Shibulal, Jun Yeol Jung, Kwang-Un Jeong and Changwoon Nah.
'Exploring a novel multifunctional agent to improve the dispersion of short aramid fiber in polymer matrix', Express Polymer Letters, Budapest University of Technology and Economics, ISSN:1788-618X, 4, 2012, 329–344. G.S. Shibulal, K.Naskar
'Synergistic effect of 4,4'-bis(maleimido) diphenylmethane and zinc oxide on the vulcanization behaviour and thermo-mechanical properties of chlorinated isobutylene isoprene rubber', Polymers for Advanced Technologies , WILEY-BLACKWELL, ISSN: 1099-1581, 28, 2017, 742-753.G.S. Shibulal, Jun Yeol Jung, Kwang-Un Jeong and Changwoon Nah
'Structurally different Short Aramid Fiber ReinforcedThermoplastic Polyurethane', Polymer Composite, WILEY-BLACKWELL, ISSN: 1548-0569, 35, 2013,1767-1778.G.S. Shibulal, K.Naskar
'Wrinkled elastomers for the highly stretchable electrodes with excellent fatigue resistances', Polymer Testing, ELSEVIER SCI LTD, 0142-9418,53, 2016, 329–337. Gi-Bbeum Lee, G. S. Shibulal, D.Y. Kim, K.U Jeong and Changwoon Nah
'Effects of curing systems on the mechanical and chemical aging resistance properties of gasket compounds based on ethylene-propylene-diene-ter monomer rubber in a simulated fuel cell environment', International Journal of Hydrogen Energy,PERGAMON-ELSEVIER SCIENCE LTD, 0360-3199, 40, 2015, 10627-10635. ChangwoonNah, S. G. Kim, G. S. Shibulal, Y H Yoo, B Mensah,and J. H. Ahn
'Lifetime prediction of flame retardant-filled ethylene-propylene-diene-ter monomer rubber compounds',Polymer Korea, POLYMER SOC KOREA, ISSN: 0379-153X, 39,2015, 795-800. Jaeho Oh, G.S. Shibulal, BismarkMensah, Dae-Up Ahn, Kwang-Un Jeong, and Changwoon Nah
'Development and Characterization of Asymmetric Swelling-Induced Wrinkles on Natural Rubber Surface', Elastomers and Composites, The Rubber Society of Korea, ISSN : 2288-7725, 51,2016,342-349.Gi-Bbeum Lee, Shibulal Gopi Sathi, Min Jung Kim, Changsin Park, Yang Il Huh , and Changwoon Nah
Conference Papers
'Development of Sulphur Cured Chlorobutyl Rubber Compound with Excellent Cure-Reversion Resistance and Low-Compression Set Properties Using a Novel Crosslinking Co-Agent' presented in 192nd Technical Meeting, International Elastomer Conference, October 09-12-2017, Cleveland, OH, USA Organized by ACS Rubber Division
'Exploring the Potential Use of 4,4′-Bis(maleimido) diphenylmethane As a Multifunctional Additive For Enhancing Thermal Stability in Halogenated Isobutylene-Isoprene Rubber for High Temperature Applications' presented in PFAM-26,October-16-21, 2017, Chonbuk National University, Jeonju, South Korea. Organized by Applied Materials Institute for BIN Convergence Technology (BK 21 Plus), CBNU
'Rheological Evidences for Strain Induced Fiber orientation on in Short Aramid Fiber Reinforced Thermoplastic Elastomer Composite' presented in International Polymer Technology Conference and Exhibition, April-16 - 17, 2013, Shah Alam, Malaysia Organized by Polymer Technology Programme, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam Selangor
'Influence of Strain Induced Fiber orientation on the Melt Rheological Behaviour of Short Aramid Fiber Reinforced Thermoplastic Elastomer' presented in International Conference on Rubber and Rubber Like Materials, March-6 - 9, Kharagpur, India. Organized by Rubber Technology Centre, IIT Kharagpur
'Effect of In Process Fiber Orientation on the Melt Rheological Behavior of a Short Aramid Fiber Reinforced Thermoplastic Elastomer' presented in 3rd FAPS Polymer Congress and MACRO,May 15-18,2013, IISC, Bangalore
'Development of Composites based on Aramid Short Fiber/Thermoplastic Elastomer with special reference to Mechanical, Rheological and Morphological Characteristics' presented in International conference on Advances in Materials and Materials Processing, December 9-11, 2011, Kharagpur, India. Organized by Department of Metallurgical and Materials Engineering, IIT Kharagpur
'Studies on Mechanical, Dynamic mechanical, Rheological and Morphological characteristics of RFL dipped aramid short fiber reinforced EPDM/PP based thermoplastic elastomer composite' presented in KinsukNaskarInternational conference on Advances in Polymer Technology, February-26, 2010, Cochin, India. Organized by Department of Polymer Science and Rubber Technology, CUSAT
Honors and Awards
Brain Korea Fellowship for postdoctoral research from South Korea during December 2014 –December 2016 and April 2017 to present
JSPS Invitation Fellowship by the Japan Society of Promotion of Science (for attending an international workshop on Polymer Rheology) at Department of Polymer Science and Engineering,Yamagata University, Yonezawa, Japan September- 2011)
Best Oral Presentation award on the Research Scholars Day held at Rubber Technology Centre, IIT Kharagpur, India, August-2012
Science Publishing Group
NEW YORK, NY 10018
Tel: (001)347-688-8931